MikroTik RouterOS 7.23.x

Подробное описание изменений в MikroTik RouterOS 7.23.x. Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 25 мая 2026, дата выхода последнего набора изменений – неизвестна.

Чек‑лист по настройке MikroTik RouterOS v7

Актуальность: RouterOS 7.23 (июнь 2026 г.)
Содержание: pdf-файл на четырех страницах, содержащий список пунктов, необходимых при настройке MikroTik (Firewall, Wi‑Fi, QoS, NAT, DHCP, DNS, а также многое другое).

MikroTik RouterOS 7.23.1 Stable

Дата выхода: 2 июня 2026.

Пакеты RouterOS v 7.23.1
Платформа	Основной пакет	Дополнительные пакеты
ARM64	Скачать	Скачать
ARM	Скачать	Скачать
MIPSBE	Скачать	Скачать
MMIPS	Скачать	Скачать
SMIPS	Скачать	Скачать
TILE	Скачать	Скачать
PPC	Скачать	Скачать
x86	Скачать	Скачать

Изменения:

app - fixed bogus configuration export;
app - fixed making empty directories when running configuration export;
bgp - fixed memory leak;
bridge - fixed stability issue when using DHCPv4 snooping;
disk - avoid reading SCSI stats all the time to allow disks to go to sleep;
disk - improved error message when a swap file is created without "file-size" specified;
ethernet - fixed stability issue with TSO on Alpine CPUs;
firewall - improved system stability;
ipsec,ike2 - improved TSi validation to prevent modecfg address conflicts;
ipv6 - do not disable IPv6 FastPath when Traffic Flow is enabled;
ospf - added missing interface parameters;
ospf - fixed unresolved route problem when "routing-table" setting is used;
ptp - rename "smpte" to "smpte-2059";
route - improved overall stability;
route - removed deprecated "/routing/route/rule" menu;
switch - fixed rare possibility of tx-timeout or simultaneous flap of all switch ports on devices with Alpine CPUs.

MikroTik RouterOS 7.23 Stable

Дата выхода: 25 мая 2026.

Пакеты RouterOS v 7.23
Платформа	Основной пакет	Дополнительные пакеты
ARM64	Скачать	Скачать
ARM	Скачать	Скачать
MIPSBE	Скачать	Скачать
MMIPS	Скачать	Скачать
SMIPS	Скачать	Скачать
TILE	Скачать	Скачать
PPC	Скачать	Скачать
x86	Скачать	Скачать

Изменения:

upgrade - use HTTPS by default when connecting to MikroTik upgrade servers;
app - added "network-outgoing-access=yes/no" setting to prevent containers from initiating outbound traffic;
app - added birdnet-go, cryptpad, diagrams-net, lorawan-stack, metube, mikrodash, nextcloud-whiteboard, paperless-ngx, wbo, zulip apps;
app - added docker-with-dockge, docker-with-komodo, docker-with-portainer, HA-otbr-matter, odoo, otbr, stalwart, trip apps;
app - added possibility to set app command-line parameter from CLI;
app - added restart command;
app - allow apps on XFS file systems;
app - allow filtering by installed apps;
app - allow overriding default stop signal;
app - allow parsing DNS in YAML;
app - allow passing stop signal from YAML and passing it to container as default;
app - allow picking app category from drop-down;
app - allow updating name parameter from YAML for custom apps;
app - allow updating YAML for existing custom app, forces cleanup;
app - apps now check for port availability, apps will not start on "internal" if app masks existing service;
app - automatically pass any required devices to container, such as otbr;
app - automatically restart app when required hardware device is changed;
app - bundled ollama with openwebui;
app - check if certificate already exists before creating a new one;
app - disabled PiHole syncing NTP to host;
app - fixed issue where XFS disks did not appear in the app disk drop-down;
app - fixed saving custom apps;
app - fixed showing ui-url for apps;
app - fixed some apps not containing the full repository URL;
app - fixed stability issue when running cleanup on many apps;
app - fixed store issue when adding a custom app;
app - fixed YAML not exported for custom apps;
app - improved app network and port behavior;
app - improved automatic hardware device passing to container;
app - improved YAML error message;
app - make sure all layer .tar.gz files are deleted after extraction finishes;
app - on file-based devices, swap is enabled on the file itself instead of creating another and enabling it on that;
app - stability fixes for the "/app" menu;
app - swap file is now created based on the mount-point it is attached to;
app - updated uptime-kuma image;
arm64,x86 - updated Broadcom bnxt Ethernet driver for 200G support;
bfd - fixed source address selection for IPv6 multihop sessions;
bridge - added ability to set custom Option 82 with dhcp-agent-circuit-id, dhcp-agent-remote-id settings (replaces add-dhcp-option82 setting; configuration is automatically updated after upgrade);
bridge - added DHCPv6 snooping feature with ability to set custom Option 18 and Option 37;
bridge - fixed dynamic VLAN update for WiFi interfaces;
bridge - improved MAC synchronization for MLAG;
bridge - recognize more DHCP message types when dhcp-snooping is enabled;
bth - fixed WireGuard client config IP address netmask;
certificate - added "ISRG Root X1" and "DigiCert Global Root G2" to SMIPS built-in root certificate authorities store;
certificate - allow deleting ACME certificate that failed to generate;
certificate - improved ACME logging;
certificate - improved ACME status reporting;
certificate - set Let's Encrypt as default ACME directory;
chr - improved guest tool config for arm64 CHR;
cloud - cloud backup file management now requires "policy" policy;
cloud - show error if cloud services are not supported on the device;
console - added comment in "/ip/dhcp-server/option/sets" and "/ipv6/dhcp-server/option/sets" menus;
console - added path parameter to export;
console - added syntax highlight for script properties in some menus (e.g. dhcp-client, dhcp-server, ppp/profile, interface/vrrp);
console - export mentions custom defconf script presence in header;
console - fixed "/log/print follow on-event" to work with "where" (introduced in v7.22);
console - fixed output when oversized completion present;
console - removed redundant keepalive for the serial-terminal, ensure that the device no longer periodically outputs /0 while using "/system/serial-terminal";
console - show "/system/resource/hardware/usb-power-reset" only on x86;
console - show warning in print header when terminal is too narrow to show any columns;
console - treat non-existent command parameters as runtime errors;
container - added restart-policy=no/always/on-failure, stop-on-unhealthy, restart-count, restart-interval, restart-max-count properties;
container - added support for noexec option to mounts;
container - added support for USB audio devices for containers;
container - allow disabling individual container environment variables without deleting them;
container - allow picking mount source directories with the file picker in WinBox;
container - allow setting memory-max globally and per container;
container - allow user-defined mounts overriding /sys and /dev;
container - check if root-dir does not exist before adding a container;
container - clean up layers of non-existing containers;
container - detect and show containers killed by out-of-memory killer;
container - do not allow starting container/shell with non-existing user or group;
container - draw graphs in container stats;
container - fixed container entrypoint and shell override by user;
container - fixed container layer size calculation;
container - fixed container shell not working with multi-arg commands;
container - fixed repull if root-dir of container was in tmpfs;
container - fixed running "/container shell" with the correct user, if container user is set or overridden;
container - improved errors at container start;
container - improved running container instance memory usage;
container - layers are now accessible under "Layers" tab;
container - pass any container startup error message back to "run" and make it exit immediately;
container - remove container backup directory if import fails;
container - removed "Layers" button;
container - show container size and container data size;
container - show default DNS servers;
container - show layer size calculation status;
container - updated /dev/net/tun permissions;
crypto - fixed fallback flag loss in qcrypto;
crypto - fixed stability issue;
crypto - improved safexcel driver with upstream changes and patches;
dhcpv4-server - added "add-dns-entries" and "add-dns-entries-suffix" properties for creating local DNS entries;
dhcpv4-server - changed lease agent-circuit-id and agent-remote-id format to hex;
dhcpv4-server - do not raise an alert when receiving a packet originating from the same device;
dhcpv4-server - do not suggest bogus pools when using setup command (e.g. when address is /31 or /32);
dhcpv4-server - fixed an issue where renew packets without giaddr were sometimes not processed;
discovery - added "add-dns-entries" and "add-dns-entries-suffix" properties for creating local DNS entries;
discovery - added option to disable/enable LLDP MED;
discovery - added separate read-only menu "/ip/neighbor/lldp" for neighbors discovered by LLDP (CLI only);
discovery - dynamically update advertised "interface-name";
discovery - fixed LLDP MAC/PHY TLV;
disk - added "/disk" smart-info;
disk - added disk check and repair for ext4, Btrfs and XFS file systems;
disk - improved device name tracking in "/system/resource/hardware" menu;
disk - show disk io errors in "/disk" menu;
dns - added HTTP/2 support to DoH on ARM64 and x86/CHR devices;
ethernet - improved system stability for RB3011, L009, NetMetal ax, hAP ax lite devices;
ethernet - improved system stability on devices with Alpine CPUs;
fetch - fixed non-working idle-timeout in some cases;
file - added copy, tail, head commands (CLI only);
firewall - added "action=drop" to mangle;
firewall - improved stability for SIP helper;
firewall - matcher "in-bridge-port" does not require "use-ip-firewall=yes";
graphing - improved service stability when storing data;
hardware - report the correct state of PCI devices in "/system/resource/hardware" menu;
health - hide health menu for RB951ui-2nD;
ike2 - fixed child SA cleanup during flush operation;
ike2 - fixed pending responder connection cleanup after peer removal;
ike2 - fixed SA delete handling on initiator during rekey;
ike2 - improved HMAC size validation checks;
interface - show warning when same MAC address is used on more than one virtual interface;
iot - added LoRa Tx delay setting;
iot - added MQTT subscribe message real-time monitoring option;
iot - added Wiliot support;
iot - fixed LoRa LBT issues, which caused Tx packets not getting delivered;
iot - fixed LoRa lockpack preventing lock from applying;
iot - improved LoRa stability;
iot - improved LoRa Tx handling;
iot - improved LoRa Tx scheduling;
ip - added IPv6 and VRF support for reverse-proxy;
ip - added SNI logging for reverse-proxy;
ip - fixed hanging connections for reverse-proxy;
ip-settings - added ipv4-fragment-time and ipv4-high-fragment-thresh settings, use default values based on total device memory;
ipip - disabled IPv6 link-local address generation;
ippool - fixed issue when changing pool with already used addresses;
ippool6 - allow variable length pool;
ippool6 - properly follow pool changes for already used prefixes;
ipsec - added netlink-based SA and policy handling;
ipsec - fixed SA proto parameter conversion and policy "none" type handling;
ipsec - improved NAT encapsulation parameter forwarding;
ipsec – fixed expired SA handling to prevent “no such item” errors during listing;
ipv6 - added from-pool-policy address property that controls how address is acquired from the pool;
ipv6 - added without-acquire address property;
ipv6 - always ensure that prefix length matches the one given by the pool even if address was set to 0;
ipv6,ra - added option to ignore MTU and DNS servers;
ipv6,ra - added router-advertisement-route-distance setting;
ipv6,ra - allow receiving DNS servers over multiple interfaces;
ipv6,ra - clamp valid-lifetime to minimum of 2h on deprecation;
ipv6,ra - extend processed RA logging;
ipv6,ra - fixed advertised DNS parameter logging;
ipv6,ra - fixed changing default "all" interface configuration;
ipv6,ra - fixed DNS and pref64 property unset;
ipv6,ra - fixed sending only DNS or MTU when prefix is set to "none";
ipv6,ra - improved service stability;
ipv6,ra - warn when interface is under the bridge;
isis - allow to configure metric-type;
l3hw - added HW offloaded VRF support on CRS8xx switches;
l3hw - added VRF assignment via switch ACL rules on CRS8xx switches (CLI only);
l3hw - fixed VXLAN packet matching by local IP;
leds - added new PoE fault LED cases (bad fw, PoE card power cable disconnected, PoE card not inserted);
leds - fixed power LED turning off while LTE interface is inactive (introduced in v7.22);
log - added "discover" topic and log events for discovered local DNS entries;
log - added CC option for e-mail action;
log - added ssld error logging;
log - added TLS support;
lte - added fast SIM switchover support using AT channel for MBIM modems without MBIM_CID_MS_UICC_RESET firmware support;
lte - configure IP address for AT modems even if no DNS is received from the network;
lte - delete CID profiles one by one instead of "delete all" for QMI modems, as command does not work for all modems;
lte - do not duplicate primary-band also in ca-band for QMI modems in 5G SA network;
lte - do not reconfigure modem in passthrough mode if passthrough cannot be activated because of slave interface;
lte - emit RS every 60s on LTE interface;
lte - filter packets by MAC in multi-apn setup for EC200A-EU modem;
lte - fixed automatic modeswitch for "Chateau 5G R16" and "Chateau 5G";
lte - fixed broken network scan after being interrupted by reconfiguration;
lte - fixed operator setting for QMI modems;
lte - fixed rare cases where the Tx queue could stop and never wake up on multi-core CPU devices;
lte - fixed RSSI signal monitor for 3rd party modems where AT+CSQ responses are not parsed;
lte - fixed user set MTU not applied to LTE interface;
lte - improved system stability for devices with QMI modems;
lte - improved system stability when modem configured in passthrough mode with VLANs for "Chateau 5G R16" and "Chateau 5G";
lte - improved system stability;
lte - improvements for passthrough mode in IPv6 only setup;
lte - keep MAC persistent across reboots for QMI modems;
lte - read subscriber number also for QMI modems;
lte - removed LTE external-antenna scan;
lte - set SMS send timeout to 180s;
lte - show external-antenna as "none" before actual scan is done instead of empty value;
lte - show MTU as "auto" also on interface level if "auto" used;
lte - SIMCom modems, skip error state when modem sends improperly formatted CREG response/URC;
lte - stop network scan on interruption for QMI modems;
lte - unify "modem-init" for all driver types;
macsec - added aes-gcm-xpn-128 cipher support;
netwatch - fixed memory leak when using HTTP/HTTPS GET probe with invalid src-address;
ospf - allow adding interface configuration manually, bypassing interface-template;
ospf - change virtual link configuration to use OSPF interface directly;
ospf - fixed missing interface-template configuration which previously was converted by upgrading from RouterOS v6;
ospf - fixed nssa bit check;
ospf - fixed routes not being installed on ABRs;
pimsm - do not ignore priority when selecting RP from BSR;
pimsm - fixed possible BSR loop;
pimsm - improved stability;
ping - resolve domain name to IPv6 if src-address is IPv6 address;
ping - show time in microseconds for flood-ping;
poe-out - firmware update for 802.3at capable boards (the update will cause a brief power interruption to poe-out interfaces);
port - added support for "tcp-client" and "udp" modes for "remote-access";
port - expose RG650E-EU diagnostics channel;
port - remove unused serial port on RB1100AHx4;
pppoe - do not reset pppoe-client interface when adding a comment;
ptp - added support for CRS812, CRS804;
ptp - fixed crash during initialization on some devices;
qos-hw - added automap setting to QoS Profiles (enabled by default);
qos-hw - added ECN and PFC support on CRS8xx;
qos-hw - added new default "auto" value to mirror-buffers, multicast-buffers, shared-buffers QoS Settings (old defaults are shown in export after upgrade);
qos-hw - added queueX-byte-max stats to port usage on CRS8xx;
qos-hw - fixed CPU traffic mapping to queues on CRS8xx switches;
qos-hw - introduced lossless-traffic-class and lossless-buffers settings;
qos-hw - removed shared-pool-index setting;
route - fixed link-local interface check when resolving IPv6 nexthops;
route - revert to old routing rule priorities for containers (introduced in v7.22);
routerboot - fixed Netinstall failure when using multiple partitions on AL73400, AL52400, AL32400 CPUs ("/system routerboard upgrade" required);
sftp - fixed path canonicalization request;
smb - do not start /ip smb server on container interfaces;
sniffer - added IP ECN field;
sniffer - fixed missing VLAN tag in the TZSP packets;
snmp - added missing BRIDGE-MIB OIDs (dot1dBaseNumPorts, dot1dBaseType, dot1dStpDesignatedRoot, dot1dStpPortDesignatedBridge, dot1dStpRootCost, dot1dStpRootPort, dot1dStpHoldTime, dot1dStpBridgeMaxAge, dot1dStpBridgeHelloTime, dot1dStpBridgeForwardDelay, dot1dStpPortForwardTransitions, dot1dTpAgingTime);
snmp - added missing LLDP-MIB OIDs (lldpMessageTxInterval, lldpMessageTxHoldMultiplier, lldpLocManAddrTable);
snmp - enforce minimum password length;
snmp - fixed compliance of LLDP-MIB lldpRemManAddrTable;
snmp - fixed connection tracking counter OID;
snmp - fixed dot1dStpPortDesignatedPort, dot1dStpPortDesignatedRoot OIDs;
snmp - fixed ifSpeed and ifHighSpeed OIDs for 802.3ad and balance-xor bonding interfaces;
snmp - fixed lldpLocSysDesc OID;
snmp - implemented LTE firmware upgrade option;
snmp - use "/ip/neighbor/lldp" for lldpRemTable and lldpRemManAddrTable (fixes lldpRemTable showing neighbors discovered by MNCP or CDP);
ssh - do not advertise password login method when it is disabled;
ssh - improved host resolve error logging;
switch - fixed issue with MAC table for RB2011 (introduced in v7.21);
switch - fixed missing ethernet counters for non-running interfaces on CRS8xx switches (introduced in v7.22);
switch - improved FDB operations on QCA8337, Atheros8327;
switch - rework how IEEE reserved MAC addresses are handled on QCA8337, Atheros8327;
switch - updated switch-marvell.npk driver;
switch - use names instead of numbers in switch menu configuration export;
system - improved handling of HTTP/2 connection closure;
system - improved RouterOS package download over slow connection;
system - improved switching to HTTP/1 if HTTP/2 is not supported by remote host;
system - keep HTTP/2 connection open if it is not closed by system or server;
system - make default identity based on board name;
timezone - updated timezone information from "tzdata2026b" release;
upgrade - added the option to configure HTTP/HTTPS modes when connecting to MikroTik upgrade servers;
upgrade - changed status message for scheduled installs;
upgrade - check for available packages when opening System/Packages in GUI;
usb - added ax88179_178a driver;
usb - improved USB Ethernet adapter recognition;
usb - show USB device reported maximum power;
user-manager - improved stability when removing user-profile while session updates counters;
veth - fixed link-local address not being configurable as a gateway;
vxlan - fixed fast-path when using "checksum=no" (introduced in v7.20);
vxlan - improved system stability;
webfig - added postfix byte value support (e.g. "/ip/settings/ipv4-high-fragment-thresh");
webfig - added support for filter in tables;
wifi - improved interface provisioning for WiFi 7 access points;
wifi - improved on-capsman traffic processing;
wifi-mediatek - fixed multicast-enhance functionality;
wifi-mediatek - fixed stability issue getting regulatory information and during initialization;
wifi-qcom-be - fixed incorrect channel info for punctured channels;
wifi-qcom-be - fixed stability issue during initialization;
wifi-qcom-be,mediatek - correctly advertise RRM capabilities when 802.11k neighbor reports are enabled;
winbox - added "MLD Static" and "MLD Datapath" properties under the "WiFi/CAP" menu;
winbox - added "Multipath" property under the "Routing/BGP/Instance" menu;
winbox - added “Remove” action under "System/Certificates/Requests" menu;
winbox - added comment for DHCPv6 relay;
winbox - added group numbers for DH and PFS groups for IPsec;
winbox - allow setting "CAPsMAN address" for CAP as domain name;
winbox - do not accept interface without specifying IP or MAC in "Ping To" field;
winbox - improved "External Antenna" property display;
winbox - improved Routing/PIM SM menu;
winbox - move bridge IGMP Snooping checkbox to IGMP tab;
winbox - rename DHCPv6 server binding "Peer Address" to "Client Address";
winbox - show "Directory URL" field for ACME certificates in Certificate view;
winbox - show "IPv6 Address" property by default under the "IP/Neighbors" menu;
winbox - show accepted connections in tree view under "IP/Services" menu;
winbox - updated socksify icon for firewall NAT rules;
wireguard - improved system stability;
www - added partial content (HTTP 206) support;
www - improved REST API user cache processing;
www - improved system stability;
zerotier - switch to 1.14.2 version.

Полезные ссылки

Онлайн-курсы по MikroTik

Онлайн-курсы по сетям

Telegram-каналы

Telegram-чат

MikrotikLab

Прочее