MikroTik RouterOS 6.32.x (Stable)

Материал из MikroTik Wiki
Перейти к навигации Перейти к поиску

Подробное описание изменений в MikroTik RouterOS 6.32.x (Stable). Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 31 августа 2015, дата выхода последнего набора изменений – 17 сентября 2015.

Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам

MikroTik RouterOS 6.32

Дата выхода: 31 августа 2015

Изменения:

  • trafflow - added support for IPv6 targets;
  • switch - fixed port flapping on switch ports of RB750, RB750UP, RB751U-2HnD and RB951-2N (introduced in 6.31)
  • ipsec - added compatibility option skip-peer-id-check;
  • flash - fix kernel failure (exposed by 6.31);
  • bridge firewall - add ipv6 src/dst addr, ip protocol, src/dst port matching to bridge firewall;
  • RB911/RB912 - fix SPI bus lock after fast led blink;
  • ipsec - fix potential memory leak;
  • bridge firewall - vlan matchers support service tag - 0x88a8;
  • ippool6 - try to acquire the same prefix if info matches recently freed;
  • crs switch - allow to unset port learn-limit, new default is unset to allow more than 1023 hosts per port;
  • x86 - fixed 32bit multi-cpu kernel support;
  • chr - add hotspot,btest,traffgen support;
  • revised change that caused reboot by watchdog problems introduced in v6.31;
  • ipsec - use local-address for phase 1 matching and initiation;
  • ipsec - fix transport mode ph2 ID ports when policy selects specific ip protocol on initiator;
  • certificates -fixed bug where crl stopped working after a while;
  • ip accounting - fixed kernel crash;
  • snmp - fix system scripts get;
  • hotspot - ignore PoD remote requests if no HotSpot configured;
  • hotspot - fix kernel failure when www plugin aborts on broken html source;
  • torch - add invert filter for src/dst/src6/dst6 addresses ;
  • bonding - add min_links property for 802.3ad mode;
  • snmp - get vlan speed from master interface;
  • hotspot - fix html-directory path on small flash devices;
  • mipsbe - make system shutdown work again;
  • lcd - fixed parallel port LCD display support on multi-cpu x86;
  • bridge - fixed use-ip-firewall-for-vlan in setups with multiple bridges;
  • ipv6 - fixed DHCP-PD client skips some steps when renewing lease;
  • upnp - fixed protocol port selection for upnp protocol comunications;
  • firewall - fixed limit and dst-limit options.
  • winbox - fixed wireless interface l2mtu (VirtualAP and WDS interface creation in winbox)
  • winbox - fixed multiple firewall rule moving in Winbox 2
  • simple queues - restrict all changes in dynamic simple queues.

MikroTik RouterOS 6.32.1

Дата выхода: 7 сентября 2015

Изменения:

  • RB911/912 - fixed lock-up;
  • RB493G - fixed reboot loop;
  • firewall - do not lose firewall mangle rules on start-up;
  • defconf - fix default configuration for routers without wireless package.

MikroTik RouterOS 6.32.2

Дата выхода: 17 сентября 2015

Изменения:

  • cerm - guard template from parallel use
  • mipsle - fixed missing second level menu in CLI;
  • sstp - avoid routing loops on client when adding default route;
  • sstp - fixed problem where sometimes sstp ip addresses were invalid;
  • switch - fixed bogus log messages about excessive broadcasts/multicasts on master-port;
  • tftp - fix request file name reading from packet
  • pptp encryption - better handling for out-of-order packets;
  • ethernet - added support for new ASIX USB Ethernet dongles;
  • CAPsMAN - fix 100% CPU usage when trying to upgrade RouterOS on CAP;
  • upgrade - fixed default configuration export;
  • ppp - fixed ppp interface stuck in not running state;
  • ipsec - fixed kernel failure when packets were not ordered on first call;
  • upnp - randomize action urls to fix "filet-o-firewall" vulnerability;
  • RB532/RB564 - fixed no link after ethernet disable/enable;
  • romon - fixed default configuration export;
  • tile - fixed occasional deadlock on module unload;
  • mesh - fix router lock-up when interface is added/removed;
  • ipsec - fix sockaddr buf size on id generation for ipv6 address;
  • health - show correct voltage for CRS109,CRS112,CRS210 when powered through PSU and show voltage up to 27V when powered through PoE;
  • email - resolve server address;
  • snmp - show firmware upgrade info;
  • upgrade - report status in check-for-updates.
Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам