MikroTik RouterOS 7.5.betaX

Материал из MikroTik Wiki

Подробное описание изменений в MikroTik RouterOS 7.5.betaX. Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 22 июля 2022, дата выхода последнего набора изменений – 17 августа 2022.

Полезные материалы по MikroTik

Углубленный курс "Администрирование сетевых устройств MikroTik"
Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA. 
На Telegram-канале Mikrotik сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь

MikroTik RouterOS 7.5.beta11

Дата выхода: 17 августа 2022

Изменения:

  • bgp - improved stability when "default-originate" is configured;
  • console - fixed automatic command completion with keypress;
  • dhcpv6-client - use /128 prefix for IA_NA addresses;
  • dns - added "address-list" parameter for static DNS entries (CLI only);
  • hotspot - improved stability when receiving bogus packets;
  • interface - fixed default interface naming on RB1100x2;
  • leds - fixed default LED configuration for RBwsAP-5Hac2nD;
  • lte - fixed AT channel for Sierra Wireless modems with device ID 0x9091;
  • ntp - fixed NTP server when "use-local-clock" is used;
  • ospf - fixed handling of external forwarding address;
  • sfp - improved stability when using 2.5G optical modules in CCR2116, CCR2216 and CRS518;
  • webfig - allow to specify NTP server as domain name;
  • winbox - enabled all filters by default under "Tools/Torch" menu;

Другие изменения относительно v7.4.1:

  • bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
  • bridge - fixed "new-priority" value validation for NAT rules;
  • capsman - added randomized range option for "reselect-interval" parameter (CLI only);
  • certificate - fixed handling of empty AKID by SCEP client;
  • container - added tun/tap support for containers;
  • container - fixed free disk space checking;
  • container - fixed handling of mounted directories;
  • container - fixed imported tar image path logging message;
  • defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
  • dhcpv4-server - fixed removal of dynamic leases when server is removed;
  • dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
  • dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
  • dhcpv6-server - improved stability when acquiring binding;
  • dns - added "match-subdomain" option for static entries (CLI only);
  • firewall - added support for RTSP helper;
  • health - fixed "temperature" and "power-consumption" readings on RB1100x4;
  • health - improved voltage reading on CRS112-8P-4S;
  • health - renamed "CPU" to "switch" for temperature reading information on CRS518-16XS-2XQ;
  • hostpot - fixed Walled Garden functionality for HTTPS sites;
  • hotspot - automatically reject all HTTPS requests passing through HotSpot server for unauthorized users;
  • hotspot - limit maximum allowed connections based on free RAM resources;
  • hotspot - removed "https-redirect" option;
  • ike2 - allow sending certificate chain as initiator;
  • l3hw - fixed HW offloaded NAT;
  • leds - fixed wireless LED functionality on LHGG;
  • lora - do not ignore negative sign for spoofed GPS coordinates;
  • lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
  • lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
  • lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
  • lte - changed cell ID info display to short format for 3G connections;
  • lte - disallow empty APN name only for default entry;
  • lte - fixed LTE interface presence for Telit LN940;
  • lte - fixed UDP performance on MMIPS devices;
  • lte - improved antenna scan for Chateau devices with switchable antennas;
  • lte - improved configuration export when multiple LTE interfaces are present;
  • lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
  • netinstall - fixed Netinstall procedure for ARM devices;
  • netwatch - automatically start migrated probes from previous RouterOS versions;
  • netwatch - changed ICMP default packet loss fail threshold to 85%;
  • ospf - improved stability when interface is being disabled during database exchange;
  • ovpn - fixed encryption key renewal process which caused periodic session disconnects;
  • ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
  • ovpn - moved disconnected user logging message from "debug" to "info" topic;
  • ping - improved service stability;
  • port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
  • port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
  • ppp - improved service stability under high load;
  • ppp - use /32 as default netmask if not specified for "routes" parameter;
  • ptp - improved system stability on CRS devices;
  • quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
  • rb5009 - fixed ether1 status reporting after system reboot;
  • route-filter - fixed "delete bgp-communities" command;
  • routerboard - added "reset-button" script feature for TILE devices;
  • sfp - fixed "eeprom" reading on single SFP port ARM devices;
  • sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
  • sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
  • sfp - improved combo SFP ports initialization handling on CRS312-4C+8XG, CRS328-4C-20S-4S+;
  • snmp - fixed usage of VRF after system startup;
  • socks - fixed "dst-port" usage when checking access list;
  • ssh - added AES support for PEM decryption;
  • ssh - fixed importing of public keys;
  • ssh - fixed minor typo issue when importing public key;
  • sstp - fixed client stuck in "nonce matching" state;
  • switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
  • switch - removed limit for number of hardware-offloaded bonding interfaces;
  • swos - enabled SwitchOS support for CRS310-1G-5S-4S+;
  • swos - fixed SwOS upgrade procedure on CRS305-1G-4S+;
  • traceroute - added "do-not-fragment" parameter support (CLI only);
  • traceroute - increased packet size limit to 65535;
  • vrrp - added "sync-connection-tracking" compatibility with preemption-mode;
  • vrrp - fixed HW offloaded bridge MAC address learning when changing from VRRP master to backup;
  • vrrp - fixed high CPU usage when "sync-connection-tracking=yes" and the backup router goes offline;
  • vrrp - fixed initial connection tracking synchronization, a backup router now always receives all existing connections;
  • vrrp - improved connection tracking synchronization protocol (CTSYNC), the new protocol is incompatible with previous RouterOS versions with "sync-connection-tracking=yes";
  • webfig - fixed displaying of grahs in status pages;
  • webfig - fixed floating point field's negative value in -0.*** format;
  • wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
  • wifiwave2 - added support for 802.11k;
  • wifiwave2 - disable wireless interface after wireless configuration reset;
  • wifiwave2 - fixed displaying of AKM in scan results;
  • wifiwave2 - fixed duplicated AKM in RSN message;
  • wifiwave2 - fixed group key update for client devices which connect via fast BSS transition;
  • wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
  • wifiwave2 - fixed reassociation response sending for fast transition over DS;
  • wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
  • wifiwave2 - fixed usage of Canada country setting on US locked devices;
  • wifiwave2 - improved default channel width selection for interfaces in station mode;
  • winbox - do not show previously attached LTE interfaces while establishing LTE connection;
  • winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
  • winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
  • winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
  • winbox - show warning messages for BGP connection entries;
  • wireless - fixed interface initialization on x86 devices;
  • x86 - allow downgrading to RouterOS v6 only if it was previously installed;
  • x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver.

MikroTik RouterOS 7.5.beta8

Дата выхода: 9 августа 2022

Изменения:

  • bridge - fixed "new-priority" value validation for NAT rules;
  • certificate - fixed handling of empty AKID by SCEP client;
  • container - fixed free disk space checking;
  • dhcpv4-server - fixed removal of dynamic leases when server is removed;
  • health - fixed "temperature" and "power-consumption" readings on RB1100x4;
  • health - improved voltage reading on CRS112-8P-4S;
  • hostpot - fixed Walled Garden functionality for HTTPS sites;
  • hotspot - automatically reject all HTTPS requests passing through HotSpot server for unauthorized users;
  • hotspot - limit maximum allowed connections based on free RAM resources;
  • hotspot - removed "https-redirect" option;
  • ike2 - allow sending certificate chain as initiator;
  • leds - fixed wireless LED functionality on LHGG;
  • lte - disallow empty APN name only for default entry;
  • lte - fixed UDP performance on MMIPS devices;
  • ping - improved service stability;
  • rb5009 - fixed ether1 status reporting after system reboot;
  • routerboard - added "reset-button" script feature for TILE devices;
  • sfp - improved combo SFP ports initialization handling on CRS312-4C+8XG, CRS328-4C-20S-4S+;
  • ssh - added AES support for PEM decryption;
  • switch - removed limit for number of hardware-offloaded bonding interfaces;
  • swos - fixed SwOS upgrade procedure on CRS305-1G-4S+;
  • vrrp - added "sync-connection-tracking" compatibility with preemption-mode;
  • vrrp - fixed HW offloaded bridge MAC address learning when changing from VRRP master to backup;
  • vrrp - fixed high CPU usage when "sync-connection-tracking=yes" and the backup router goes offline;
  • vrrp - fixed initial connection tracking synchronization, a backup router now always receives all existing connections;
  • vrrp - improved connection tracking synchronization protocol (CTSYNC), the new protocol is incompatible with previous RouterOS versions with "sync-connection-tracking=yes";
  • wifiwave2 - disable wireless interface after wireless configuration reset;
  • wifiwave2 - fixed group key update for client devices which connect via fast BSS transition;
  • wifiwave2 - fixed usage of Canada country setting on US locked devices;
  • wifiwave2 - improved default channel width selection for interfaces in station mode;
  • wireless - fixed interface initialization on x86 devices;
  • x86 - allow downgrading to RouterOS v6 only if it was previously installed.

Изменения относительно v7.4.1:

  • bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
  • capsman - added randomized range option for "reselect-interval" parameter (CLI only);
  • container - added tun/tap support for containers;
  • container - fixed handling of mounted directories;
  • container - fixed imported tar image path logging message;
  • defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
  • dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
  • dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
  • dhcpv6-server - improved stability when acquiring binding;
  • dns - added "match-subdomain" option for static entries (CLI only);
  • firewall - added support for RTSP helper;
  • health - renamed "CPU" to "switch" for temperature reading information on CRS518-16XS-2XQ;
  • l3hw - fixed HW offloaded NAT;
  • lora - do not ignore negative sign for spoofed GPS coordinates;
  • lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
  • lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
  • lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
  • lte - changed cell ID info display to short format for 3G connections;
  • lte - fixed LTE interface presence for Telit LN940;
  • lte - improved antenna scan for Chateau devices with switchable antennas;
  • lte - improved configuration export when multiple LTE interfaces are present;
  • lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
  • netinstall - fixed Netinstall procedure for ARM devices;
  • netwatch - automatically start migrated probes from previous RouterOS versions;
  • netwatch - changed ICMP default packet loss fail threshold to 85%;
  • ospf - improved stability when interface is being disabled during database exchange;
  • ovpn - fixed encryption key renewal process which caused periodic session disconnects;
  • ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
  • ovpn - moved disconnected user logging message from "debug" to "info" topic;
  • port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
  • port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
  • ppp - improved service stability under high load;
  • ppp - use /32 as default netmask if not specified for "routes" parameter;
  • ptp - improved system stability on CRS devices;
  • quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
  • route-filter - fixed "delete bgp-communities" command;
  • sfp - fixed "eeprom" reading on single SFP port ARM devices;
  • sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
  • sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
  • snmp - fixed usage of VRF after system startup;
  • socks - fixed "dst-port" usage when checking access list;
  • ssh - fixed importing of public keys;
  • ssh - fixed minor typo issue when importing public key;
  • sstp - fixed client stuck in "nonce matching" state;
  • switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
  • swos - enabled SwitchOS support for CRS310-1G-5S-4S+;
  • traceroute - added "do-not-fragment" parameter support (CLI only);
  • traceroute - increased packet size limit to 65535;
  • webfig - fixed displaying of grahs in status pages;
  • webfig - fixed floating point field's negative value in -0.*** format;
  • wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
  • wifiwave2 - added support for 802.11k;
  • wifiwave2 - fixed displaying of AKM in scan results;
  • wifiwave2 - fixed duplicated AKM in RSN message;
  • wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
  • wifiwave2 - fixed reassociation response sending for fast transition over DS;
  • wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
  • winbox - do not show previously attached LTE interfaces while establishing LTE connection;
  • winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
  • winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
  • winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
  • winbox - show warning messages for BGP connection entries;
  • x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver.

MikroTik RouterOS 7.5.beta5

Дата выхода: 28 июля 2022

Изменения:

  • health - renamed "CPU" to "switch" for temperature reading information on CRS518-16XS-2XQ;
  • l3hw - fixed HW offloaded NAT;
  • ppp - improved service stability under high load;
  • ppp - use /32 as default netmask if not specified for "routes" parameter;
  • sfp - fixed "eeprom" reading on single SFP port ARM devices;
  • sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
  • swos - enabled SwitchOS support for CRS310-1G-5S-4S+.

Изменения относительно v7.4:

  • bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
  • capsman - added randomized range option for "reselect-interval" parameter (CLI only);
  • container - added tun/tap support for containers;
  • container - fixed handling of mounted directories;
  • container - fixed imported tar image path logging message;
  • defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
  • dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
  • dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
  • dhcpv6-server - improved stability when acquiring binding;
  • dns - added "match-subdomain" option for static entries (CLI only);
  • firewall - added support for RTSP helper;
  • lora - do not ignore negative sign for spoofed GPS coordinates;
  • lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
  • lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
  • lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
  • lte - changed cell ID info display to short format for 3G connections;
  • lte - fixed LTE interface presence for Telit LN940;
  • lte - improved antenna scan for Chateau devices with switchable antennas;
  • lte - improved configuration export when multiple LTE interfaces are present;
  • lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
  • netinstall - fixed Netinstall procedure for ARM devices;
  • netwatch - automatically start migrated probes from previous RouterOS versions;
  • netwatch - changed ICMP default packet loss fail threshold to 85%;
  • ospf - improved stability when interface is being disabled during database exchange;
  • ovpn - fixed encryption key renewal process which caused periodic session disconnects;
  • ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
  • ovpn - moved disconnected user logging message from "debug" to "info" topic;
  • port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
  • port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
  • ptp - improved system stability on CRS devices;
  • quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
  • route-filter - fixed "delete bgp-communities" command;
  • sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
  • snmp - fixed usage of VRF after system startup;
  • socks - fixed "dst-port" usage when checking access list;
  • ssh - fixed importing of public keys;
  • ssh - fixed minor typo issue when importing public key;
  • sstp - fixed client stuck in "nonce matching" state;
  • switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
  • traceroute - added "do-not-fragment" parameter support (CLI only);
  • traceroute - increased packet size limit to 65535;
  • webfig - fixed displaying of grahs in status pages;
  • webfig - fixed floating point field's negative value in -0.*** format;
  • wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
  • wifiwave2 - added support for 802.11k;
  • wifiwave2 - fixed displaying of AKM in scan results;
  • wifiwave2 - fixed duplicated AKM in RSN message;
  • wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
  • wifiwave2 - fixed reassociation response sending for fast transition over DS;
  • wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
  • winbox - do not show previously attached LTE interfaces while establishing LTE connection;
  • winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
  • winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
  • winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
  • winbox - show warning messages for BGP connection entries;
  • x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver.

MikroTik RouterOS 7.5.beta4

Дата выхода: 22 июля 2022

Изменения:

  • bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
  • capsman - added randomized range option for "reselect-interval" parameter (CLI only);
  • container - added tun/tap support for containers;
  • container - fixed handling of mounted directories;
  • container - fixed imported tar image path logging message;
  • defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
  • dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
  • dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
  • dhcpv6-server - improved stability when acquiring binding;
  • dns - added "match-subdomain" option for static entries (CLI only);
  • firewall - added support for RTSP helper;
  • lora - do not ignore negative sign for spoofed GPS coordinates;
  • lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
  • lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
  • lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
  • lte - changed cell ID info display to short format for 3G connections;
  • lte - fixed LTE interface presence for Telit LN940;
  • lte - improved antenna scan for Chateau devices with switchable antennas;
  • lte - improved configuration export when multiple LTE interfaces are present;
  • lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
  • netinstall - fixed Netinstall procedure for ARM devices;
  • netwatch - automatically start migrated probes from previous RouterOS versions;
  • netwatch - changed ICMP default packet loss fail threshold to 85%;
  • ospf - improved stability when interface is being disabled during database exchange;
  • ovpn - fixed encryption key renewal process which caused periodic session disconnects;
  • ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
  • ovpn - moved disconnected user logging message from "debug" to "info" topic;
  • port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
  • port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
  • ptp - improved system stability on CRS devices;
  • quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
  • route-filter - fixed "delete bgp-communities" command;
  • sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
  • snmp - fixed usage of VRF after system startup;
  • socks - fixed "dst-port" usage when checking access list;
  • ssh - fixed importing of public keys;
  • ssh - fixed minor typo issue when importing public key;
  • sstp - fixed client stuck in "nonce matching" state;
  • switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
  • traceroute - added "do-not-fragment" parameter support (CLI only);
  • traceroute - increased packet size limit to 65535;
  • webfig - fixed displaying of grahs in status pages;
  • webfig - fixed floating point field's negative value in -0.*** format;
  • wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
  • wifiwave2 - added support for 802.11k;
  • wifiwave2 - fixed displaying of AKM in scan results;
  • wifiwave2 - fixed duplicated AKM in RSN message;
  • wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
  • wifiwave2 - fixed reassociation response sending for fast transition over DS;
  • wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
  • winbox - do not show previously attached LTE interfaces while establishing LTE connection;
  • winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
  • winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
  • winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
  • winbox - show warning messages for BGP connection entries;
  • x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver.

Полезные материалы по MikroTik

Углубленный курс "Администрирование сетевых устройств MikroTik"
Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA. 
На Telegram-канале Mikrotik сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь