MikroTik RouterOS 7.20.x (stable)

Подробное описание изменений в MikroTik RouterOS 7.20.x. Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 29 сентября 2025, дата выхода последнего набора изменений – 10 октября 2025.

Полезные материалы по MikroTik

Углубленный курс «Администрирование сетевых устройств MikroTik»
Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA.

ИП Скоромнов Дмитрий Анатольевич, ИНН 331403723315

На Telegram-канале Mikrotik-сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь

ИП Скоромнов Дмитрий Анатольевич, ИНН 331403723315

MikroTik RouterOS 7.20.4

Дата выхода: 05 ноября 2025.

Изменения:

bgp - improved instance upgrade from versions prior to v7.20;
console - fixed file id conversion operations;
pppoe-server - fixed client disconnects when multiple servers are active (introduced in v7.20);
rip - fixed RIP configuration conversion on upgrade from v6 to v7;
route - fixed gateway print when gateway is equal to BGP peers address;
routing-filter - check AFI when setting pref-src;
routing-filter - fixed default route destination matcher behavior for different AFIs;
webfig - fixed button handling in skin designer;
winbox - show "Bus" parameter for "USB Power Reset" on Chateau LTE6/LTE18 ax devices;
winbox - show "System/RouterBOARD/Mode Button" on devices that have such a button.

MikroTik RouterOS 7.20.3

Дата выхода: 28 октября 2025.

Изменения:

lte - fixed LED behavior for Chateau 5G R17 ax;
ppp - do not automatically add apn=internet for manually created ppp-client interfaces;
ppp - fixed ppp-client not dialing when two interfaces use same multi-channel port;
snmp - fixed various connection tracking OID definitions in MIKROTIK-MIB;
ssh - fixed non-interactive command execution (introduced in v7.20);
wifi - changed country code to "XA" for "UK 5.8 fixed outdoor" regulatory domain.

MikroTik RouterOS 7.20.2

Дата выхода: 21 октября 2025.

Изменения:

bridge - fixed incorrectly blocked ports by STP (introduced in v7.20);
console - fixed incorrect ids in /file/print relative mode (introduced in v7.20);
console - improved stability when printing ids for a non-existent directory (introduced in v7.20)
dhcpv6-client - improved system stability when DHCPv6 client uses "rapid-commit=no", "accept-prefix-without-address=no" and receives only prefix from the server;
dhcpv6-server - do not force set "address-pool" on static bindings with unset pool option after system reboot;
evpn - added basic logging support;
evpn - fixed MAC mobility;
firewall - reduce maximum connection tracking entry count;
iot - fixed an issue preventing LoRa downlink packets from being broadcasted;
ip - removed duplicate CLI parameters for socksify;
log - cleaned up older config by removing leading slashes from "disk-file-name" values;
mpls - fixed LDP label binding if nexthop is link-local address;
poe-out - fixed RB5009 PoE-in indication on cold-boot with no other power source;
routing-filter - change "^$" regexp to bgp-path-len=0 on upgrade from v6 to v7;
routing-filter - use bgp-out-med for set bgp-med on upgrade from v6 to v7;
snmp - fixed SNMP SET operation (introduced in v7.20);
snmp - set maximum message size to 8 KB;
system - fixed ".auto.rsc" file execution (introduced in v7.20);
system - fixed package list fetch from local upgrade server;
system - fixed Windows executable compatibility with Microsoft AppLocker;
winbox - added IP/Socksify menu;
winbox - added support for 200Gbps/400Gbps Rate fields;
winbox - fixed Ethernet Tx Stats (introduced in v7.20).

MikroTik RouterOS 7.20.1

Дата выхода: 10 октября 2025.

Изменения:

bgp - added output.network-blackhole setting;
bgp - do not auto-generate blackhole routes by default (introduced in v7.20);
bgp - fixed inactive flag in GUI after instance disable/enable;
console - fixed ".id" printing when using "group-by" (introduced in v7.20);
console - fixed relative path printing (introduced in v7.20);
ike1 - fixed an issue where policies could be released too early before re-acquisition;
ipsec - improved driver stability;
ipv6,ra - fixed prefix unlinking from interface on configuration change and stop deprecating prefixes when the validity lifetime expires;
lte - fixed issue with firmware update for FG621-EA modem;
ppp - added support for KNOT BG77 modem firmware upgrade to version BG77LAR02A04_A0.301.A0.301;
qos-hw - always use qos-hw-offloading=yes for CRS812 device;
quickset - fixed issue where routes set by QuickSet did not appear in export;
route - improved stability;
routerboard - fixed non-running interfaces for CRS310-8G+2S+IN after booting to SwOS ("/system routerboard upgrade" required) (introduced in v7.20);
sfp - improved interface link speed configuration for CRS812;
snmp - fixed SNMP trap messages being corrupted when sent to multiple targets;
switch - fixed "failure: cpu flow control not supported" (introduced in v7.20);
webfig - fixed form closing with saving when pressing Enter key (introduced in v7.20);
webfig - fixed interface settings and graphs (introduced in v7.20);
webfig - improved container form loading performance when router has a lot of files;
winbox - fixed WinBox 3 application failure when opening IPv6/Firewall/Connection entry (introduced in v7.20);
www - improved stability (CVE-2025-10948).

MikroTik RouterOS 7.20

Дата выхода: 29 сентября 2025.

Изменения:

arm64/x86/chr - added Aquantia network driver;
bgp - added brief, unnumbered output for advertisements list;
bgp - added initial EVPN support;
bgp - added NLRI filter for more precise accept/discard of ipv4/6 prefixes;
bgp - automatically create output.network blackhole routes;
bgp - decode and log notifications;
bgp - fixed nexthop force-self for IPv4 and IPv6;
bgp - fixed selection of received BGP VPN routes;
bgp - improved configuration upgrade from versions prior to 7.20;
bgp - improved logging;
bgp - introduced BGP instance configuration (note, downgrading to earlier versions without instance support may cause config issues);
bgp - make "as" parameter optional in template configuration;
bgp - print aigp attribute in advertisements;
bgp - refresh WinBox when BGP session is created/deleted;
bgp - resend routes after nexthop-choice update;
bgp - support for Advertising IPv4 Network Layer Reachability Information (NLRI) with an IPv6 Next Hop;
bridge - added dynamic tagged entry named "switch-cpu" in scenarios where the same VLAN spans multiple switch chips or is used on both HW and SW ports;
bridge - added verbose STP debug logging (rx/tx BPDU, edge-port and port-role transitions, FDB flush);
bridge - added warning log when all MACs cannot be displayed under the host table;
bridge - disable/enable HW offload on bonding slave disable/enable (fixes potential MAC learning issue);
bridge - fixed MVRP leave indication;
bridge - fixed port-id when adding a new port in non-primary MLAG;
bridge - improved stability when disabling bridge with dynamic VLANs in MSTI;
bridge - refactored host learning logic in MLAG setups in order to make it more robust and predictable;
bth - added extra file-share functionality for use with apps;
bth - improved tunnel name in client config export;
bth,file - added direct file sharing from the WinBox Files menu;
certificate - added "Amazon Root CA 1" to built-in root certificate authorities store;
certificate - fixed ACME certificate usage after renewal;
certificate - improved stability after failed import;
certificate - trust built-in root certificate authority store after configuration reset;
chr - added Chelsio VF driver for PCIID 5803;
chr - improved virtio_net performance;
cloud - fixed restoring "BTH Files" service after a prolonged network outage;
cloud - reduced "BTH Files" ping interval dynamically upon failure;
console - added use-tz option to :timestamp command;
console - fixed :convert to=num on MIPSBE;
console - fixed incorrect multibyte to=num conversions;
console - fixed issue where file completion sometimes shows duplicates;
console - improved stability and visuals for /interface/wireless/snooper/snoop;
console - improved visuals for brief print when displaying large tables;
console - improved visuals for hexadecimal strings;
console - improved visuals for hiding sensitive commands;
console - include flags by default when printing to value;
console - prioritize directory specific parameters and hide rarely used ones in print autocomplete;
console - replace TAB characters with spaces when editing scripts and added tab-width user configuration in /console/settings;
console - unified string representation of ID values;
console - updated hints for some /file/print parameters;
console - use file name completions (and basic validation) for file output related parameters for export and print commands;
console - validate filenames upon addition (if enabled in /console/settings);
container - added "device" option to pass a device from /system/hardware menu to a container;
container - added /container/log menu, keep 100 messages per container;
container - added default print brief mode;
container - added initial support for container in container setups;
container - added option to execute commands inside a container using "/container/shell cmd= user=";
container - added per-container memory limiting and monitoring;
container - added repull command;
container - added SCTP support;
container - added support for cpuset, cpu, memory, pids cgroups;
container - allow picking passthrough devices by descriptive name;
container - allow read-only mounts;
container - allow to mount individual files, not just directories;
container - allow to specify multiple envlists;
container - allow to use multiple veths in a container, change the in container interface name to same as in RouterOS;
container - can use KVM (x86 and arm64) in container QEMU for faster virtualization;
container - display any error prominently in WinBox;
container - do not allow multiple containers with same root directory;
container - enable check-certificate by default for new remote imports;
container - fixed containers that use inotify interface;
container - fixed environment variables not being passed to "/container/shell" properly;
container - fixed QEMU VM to host bridge;
container - fixed shell exit causing freeze;
container - improved compatibility when running containers with custom "cmd" and "entrypoint" commands;
container - improved error and log messages;
container - prevent user from setting "root-dir=/" for a container;
container - show a more descriptive error when tar extraction fails, particularly "No space left on device";
container - show config.json to user;
container - show explicit stopped flag for container;
container - stability improvements;
container - support for direct access to hardware devices;
container - terminate containers on shutdown, allow them to clean up properly;
dhcp - show error only after interface status is synced with the system (instead of erroneously displaying it immediately);
dhcp-client - show warning if DHCP client is configured on dot1x server port;
dhcp-server - do not show "I" flag when server is disabled;
dhcp-server - improved logging when dual-stack is enabled but fails to acquire client MAC from DUID;
dhcpv4-client - allow specifying DSCP of outgoing packets;
dhcpv4-client - allow specifying vlan-priority of outgoing packets (for VLAN interfaces only);
dhcpv4-client - show "custom-hostname-suffix" and "custom-source-mac-address" properties if set;
dhcpv4-server - added "add dns" step to setup wizard;
dhcpv4-server - added "lease-agent-circuit-id" and "lease-agent-remote-id" variables to the lease script;
dhcpv4-server - added "ntp-none" parameter;
dhcpv4-server - changed the default value of address-pool to "static-only" in the option matcher, removed "none" option;
dhcpv4/v6-client - properly resume client service after underlying interface status changes;
dhcpv4/v6-server - added CoA support;
dhcpv6-client - added "accept-prefix-without-address" allowing client to accept prefix when address is not available although requested;
dhcpv6-client - update the routing table and address list on manual client configuration changes;
dhcpv6-server - added "ignore-ia-na-bindings" setting that allows server to ignore address requests and work just with prefixes;
dhcpv6-server - do not trim real client DUID when assigning it to the binding;
discovery - disable discovery on loopback, LTE, ppp-out interfaces;
discovery - improved LLDP Power via MDI TLV with 802.3bt specific field support;
discovery - output LLDP fault message once per port poe-out status change;
discovery - report router as "CAPsMAN" on MNDP under "running" parameter;
discovery - set initial poe-out Tx power above 0dW;
disk - allow to format multiple disks at once;
disk - allow to remove Btrfs device by ID;
disk - better manage disks disappearing from RAID;
disk - cleanup mountpoint when setting mount-filesystem=no;
disk - disallow adding SMB share or user with empty name;
disk - do Btrfs remove-device asynchronously;
disk - offer to blink only PCI slots in console;
disk - rename raid-role=unspecified to spare;
disk - reset RAID role of old disk after spare assumes a new role;
disk - show error when file based block-device uses a mountpoint to be unmounted;
disk - show total/free inode counts for fs's that support it;
dlna - recognize flac extension;
dns - fixed memory leak when static CNAME record was matched;
fetch - display file sizes between 1-1023 bytes as 1KiB (instead of 0KiB);
fetch - include RouterOS version in the "User-Agent" field;
file - improved file handling performance in WinBox v4;
filesystem - improved calculation of free space on NAND flash (fixes potential "disk is too small" issue);
firewall - added "liberal-tcp-tracking" connection tracking setting;
firewall - added connection tracking "total-ip4-entries" and "total-ip6-entries" counters;
firewall - allow "dst-limit" matcher to work properly above value 10000;
firewall - fixed IPv6 firewall interface matchers not matching VRF interfaces;
firewall - improved IPv6 connection tracking lookup responsiveness;
firewall - improved system stability when processing connections on multicore systems;
firewall - reorganized firewall connection tracking table values and make them persistent between IPv4 and IPv6;
flashfig - bind to local address (fixes issue when multiple interfaces are enabled);
iot - added additional dongle firmwares to iot-bt-extra package;
iot - added an option to increase the amount of LoRa's traffic entries displayed;
iot - added support for MQTT last will message;
iot - adjusted default LoRa antenna gain values for specific devices;
iot - fixed an issue where channel #7 is ignored during LoRa LNS connection;
iot - fixed logic for unknown NetIDs;
iot - fixed support for LoRa Alliance NetID list;
iot - improved LoRa stability and error recovery;
iot - improvement to LoRa band verification logic;
iot - iot-bt-extra package stability improvement and additional dongle support;
iot - LoRa netid filters now can be configured as a "range";
iot - LoRa server list is no longer generated if the LR card is not physically attached;
iot - LR8G/9G firmware update;
iot - removed lora-package, LoRa functionality was moved into iot-package;
iot - removed non-existent GPIO pin functionality;
ip - added socksify feature and new NAT action "socksify";
ip-service - show service name "nfs" for port 2049;
ipsec - fixed degraded IPsec performance for IPQ-6010 (introduced in v7.17);
ipsec - move raw RSA keys to /ip/ipsec/key/rsa;
ipv6 - added support for IPv6 ND proxying of individual addresses;
ipv6 - do not allow removal of dynamic address on lo interface;
ipv6 - fixed "auto-link-local" feature on WireGuard interface;
ipv6 - make pref-src work and settable for static routes;
isis - added passive parameter for interface templates;
log - added command to clear memory action entries;
log - improved the "transmit loop detected" warning log;
lte - added "done" status for modem firmware-upgrade version check;
lte - added "remove-sent-sms-after-send" option to automatically delete sent SMS messages;
lte - added log entry if eSIM has no profiles on read;
lte - added modem-init string response to system log;
lte - added passthrough support for RG650E-EU modem;
lte - added show-capabilities eSIM presence detection for MBIM modems;
lte - allow only one IPv6 APN for AT modems;
lte - display ICCID regardless of SIM PIN entry status;
lte - do not reconfigure modem if deactive eSIM profile is deleted;
lte - exempt eSIM provision from global CRL certificate settings;
lte - exit LTE scan if modem reconfigured;
lte - fallback to RA for global IPv6 if unattained via AT channel (resets on config change);
lte - fixed inappropriate LTE interface inactive flag shown during modem initialization;
lte - fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16;
lte - fixed progress message for R11e-LTE modem firmware-upgrade;
lte - fixed rare case where AT dialer could stop;
lte - improved EC200A-EU firmware-upgrade stability;
lte - improved SMS sending stability over MBIM protocol;
lte - refresh eSIM profile list after successful provision;
lte - renamed "uicc" to "iccid" in LTE monitor and eSIM profile print;
lte - show ip-type in /interface/lte/apn/print;
lte - use modem-supplied IPv6 address over EUI-64 when available;
macvlan - allow creating macvlan interfaces on all interfaces with a MAC address;
mpls - fixed minimal dynamic-label-range setting;
net - fixed possible slave flag issues after user configuration changes;
net - improved system stability when processing TCP/UDP connections;
net - prevent removal of lo interface via WinBox;
netinstall - added after-install controls (reboot after installation, shutdown after installation, none);
netinstall - alert on unreadable configuration scripts;
netinstall - detect inactive install interface;
netinstall - fixed install for PPC devices;
netinstall - fixed mutually exclusive checkbox behavior;
netinstall - show router and package architecture;
netinstall - warn user if not enough space on device;
netinstall-cli - added MAC filter option "--mac";
netinstall-cli - added multiple install option "-m";
netinstall-cli - improved client device architecture detection;
netwatch - added "early-success-detection" and "early-failure-detection" properties for ICMP probe;
netwatch - fixed date and time for stats;
ovpn - added support for sha384 hmac;
ovpn - improved tunnel setup speeds in configurations with large ammount of active OVPN clients;
partitions - fixed failure to repartition correctly from 32MB partition size;
partitions - hide partition menu on unsupported boards (without NAND);
partitions - limit minimal partition size to 60MB;
poe-out - added support for line-interactive and offline UPS on CRS320;
poe-out - firmware update for 802.3at capable boards (the update will cause brief power interruption to poe-out interfaces);
poe-out - firmware update for 802.3bt capable boards (the update will cause brief power interruption to poe-out interfaces);
poe-out - improved dual-signature detection on CRS320;
poe-out - improved short-circuit detection and reporting on CRS320;
poe-out - increased maximum power margin for all classes on CRS320;
port - added IPv6 support for "remote-access" tool;
port - improved port status handling at unexpected device removal;
ppp - added "dhcpv6-use-radius" PPP profile feature that enables "use-radius" option on dynamically created DHCPv6 servers;
ppp - added "remote-ipv6-prefix-reuse" PPP profile feature that allows to advertise same prefix on multiple VPN clients at the same time;
ppp - added DHCPv6 assigned prefix to address list when configured and received from RADIUS;
ppp - added dhcpv6-lease-time profile configuration property;
ppp - do not send initial echo request if keepalive-timeout=disabled;
ppp - improved system stability when closing connections;
pppoe-server - added accept-untagged=yes/no option to accept untagged traffic in combination with pppoe-over-vlan-rage property;
ptp - added PTP support for RDS2216 device;
ptp - removed delays between timestamping and packet transmission, improving PTP precision;
qos-hw - added mirror-buffers property and monitoring values;
radius - fixed issue with Session-Timeout attribute functionality;
romon - changed default "disabled=yes" to "disabled=no" under /tool/romon/port;
romon - improved error message;
route - added missing and remove unnecessary parameters from /ipv6/route menu;
route - afi naming consistency in logs;
route - attempt to clean up stuck routes in the routing table;
route - do not allow to modify dynamic routes;
route - fixed incorrectly set nexthop interfaces for BGP VPN routes;
route - fixed issue when route table is installed to kernel without fib setting;
route - fixed skipping updated destinations;
route - improved stability;
route - removed fib-reinstall;
route - update router ID when disabled address is removed;
routerboot - fixed boot MAC for CRS212 switch ("/system routerboard upgrade" required);
routing-filter - added filter-wizard (filter generator with v6-like syntax);
routing-filter - added sync command;
routing-filter - make "chain" and "list" parameters required when adding new item;
sfp - fixed low power mode pins on CRS326-4C+20G+2Q+ for optical QSFP modules;
sfp - fixed qsfp28 breakout disable;
sfp - improved initialization and linking for sfp28 on CRS518;
sfp - improved SFP handling for CRS418 device;
sfp - improved system stability with some GPON modules for CCR2004 and CCR2116 devices;
smips - reduced package size, removed hotspot feature and provide it as a separate package;
sniffer - added CPU number and fast-path status in per-packet comment;
sniffer - save packets in pcapng format, it now includes interface name the packet was sniffed on, packet direction and nanosecond timestamp resolution;
snmp - added SNMP OIDs for firewall connection tracking "total-entries", "total-ip4-entries" and "total-ip6-entries";
snmp - improved service stability when processing v3 requests;
snmp - set maximum message size to 4 KB;
ssh - improved stability on busy server;
ssh - show user public key fingerprint under /user/ssh-keys;
ssh/sftp - fixed session disconnects during file transfer;
ssl/tls - fixed SSL looping behavior when multiple different TLS connections were used;
supout - added certificate settings section;
supout - added IP Service section;
supout - added MPLS settings section;
supout - added VXLAN VTEP section;
switch - fixed bonding MAC flush in certain cases for 98DX224S, 98DX226S, 98DX2528, and 98DX3236 switch chips;
switch - fixed egress-rate on QSFP ports;
switch - fixed port blocking by MSTP for 88E6393X, 88E6191X and 88E6190 switches;
switch - hide cpu-flow-control on irrelevant devices;
switch - improved bond MAC flush for 88E6393X, 88E6191X and 88E6190 switches;
switch - improved hash calculation for 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98CX8410 switches (affects load balancing for bonds, ECMP routes, and VXLAN source port);
switch - improved ingress-rate limit precision for 88E6393X, 88E6191X and 88E6190 switches;
switch - reset all Ethernet counters on reset-counters command on QoS Port menu;
switch - rework ethernet counters for 98DXxxxx, 98PX1012 and CRS1xx/2xx switches (add tx-drop-queueX-byte/packet, tx-drop-byte/packet, tx-queueX-byte to /in/eth and updated GUI);
system - added support for OpenFlow 1.3 (new package "openflow" available);
system - do not automatically retry in case /system/package/update download fails;
system - fixed bb-upgrade failure on RB5009;
system - fixed certain notifications (e.g. kid-control activity, connection tracking table) (introduced in v7.17);
system - fixed stuck TCP transmit on virtual interfaces, leading to retransmits;
system - improved system configuration journaling procedure;
system - improved system stability for hEX refresh and hEX S (2025);
system - improved system stability when processing large amount of traffic;
system - merge /system/resource/usb and /system/resource/pci into /system/resource/hardware and create a device tree;
usb - improved system stability after unplugging USB device for RB5009;
user - added tiny delay on any user login attempt to limit login attempts;
user - change /user/active/request-logout to /user/active/remove;
veth - added dhcp=yes/no property to be able to easily run a container in LAN, runs a special dynamic dhcp-client on interface and sets acquired address/gateway/dns to in-container interface;
veth - added mac-address property;
veth - make veth interface MAC address stable in both RouterOS and container (container-side MAC incremented by +1 from RouterOS-side interface);
vrrp - added "connection-tracking-port" and "connection-tracking-mode" settings for "sync-connection-tracking";
vrrp - added proxy-arp support;
vrrp - fixed invalid TCP connection state after failover with enabled sync-connection-tracking;
vrrp - fixed sync-connection-tracking issue when parent interface is disabled/enabled;
vrrp - improved responsiveness when router has many IP addresses depending on VRRP state;
vrrp - improved stability when removing VRRP interface with enabled sync-connection-tracking;
vrrp - make MTU property read-only;
vxlan - added checksum and learning properties;
vxlan - fixed unset behavior for "local-address" and "bridge" properties;
vxlan - prevent socket sharing (cannot create multiple VXLAN interfaces using the same UDP port with different checksum or vtep-vrf settings);
vxlan - rename "vrf" setting to "vtep-vrf";
webfig - added token authentication (no password prompt on reload or new window, logout button will log out all related sessions, removing a user will disconnect from active sessions);
webfig - allow network map scrolling in Dude;
webfig - basic mobile keyboard support for terminal;
webfig - do not show Keepalive if not set in GRE Tunnel form;
webfig - filter out unusable Bands and Channels for wifi interfaces;
webfig - fixed an issue where dynamic dropdown lists were hidden despite having values;
webfig - fixed container parameters;
webfig - fixed hiding New button with skins;
webfig - fixed issue where legacy WebFig login page was used;
webfig - fixed skin limits for radio buttons;
webfig - fixed Target field duplicate when disabling simple queue;
webfig - improved stability when displaying read-only scripts;
webfig - make columns a bit wider in tables;
webfig - make the Close buttons actual buttons, not links;
webfig - mask certain fields where values match default value;
webfig - redesign logical "not" operator selector;
webfig - remove duplicate flag labels in QuickSet tables;
webfig - show system note on login;
webfig - use lexicographical sort in dropdown lists;
webfig - use time stamps for volatile graphs (improved graph visualization);
wifi - added tr069 support for wifi interfaces;
wifi - avoid picking 5GHz channels by default which are unlikely to be supported by clients, can be overridden with channel.deprioritize-unii-3-4;
wifi - fixed inability to apply steering profile to device's native wifi interfaces;
wifi - fixed issue where station mode looped connecting to the same BSSID, preventing switching to other APs;
wifi - increased wifi scan list;
wifi - restart CAPsMAN only on significant configuration changes;
wifi-qcom - accept VLAN-tagged packets from clients with vlan-id;
wifi-qcom - added country profile "UK 5.8 fixed" and "ETSI 5.5-5.7 Outdoor";
winbox - added "Digest Algorithm" under "System/Certificates" menu;
winbox - added "Note" field in LTE Firmware Upgrade;
winbox - added "Reselect Time" for wifi;
winbox - added Address List Extra Time under "IP/DNS" menu;
winbox - added EAP identity under "WiFi/Registration" menu;
winbox - added Heartbeat under "Bridge/MLAG" menu;
winbox - added Installation under "WiFi" menu;
winbox - added missing columns under "System/Users/SSH Keys" menu;
winbox - added missing Comments under "User Manager" menus;
winbox - added missing properties to "Container" menu and improved field ordering;
winbox - added missing WPA2 PSK SHA2 option under "WiFi/Security" menu;
winbox - added MPLS Mangle;
winbox - added option to create new entries under "System/Users/SSH Keys" menu;
winbox - allow to specify CAPsMAN Address as IPv6 LL;
winbox - bump minimal WinBox version to 3.42;
winbox - correctly unset Locked CAPsMAN field;
winbox - differentiate PPP Profile Rx/Tx Queue settings;
winbox - display errors from the "Files/Sync" menu;
winbox - fixed "Rate" and "Full Duplex" monitor values after link down under "Interface/Ethernet" menu;
winbox - fixed container RAM parameter type;
winbox - fixed missing warning under "Routing/BGP/Instances" menu;
winbox - fixed Record Type field under "Tools/Netwatch" menu;
winbox - improved byte type field representation;
winbox - improved Switch QoS layout;
winbox - make IPv6 Immediate Gateway read-only;
winbox - make log message field as multiline;
winbox - move CAPsMAN settings button from Remote CAP to WiFi table;
winbox - removed duplicate mounts option;
winbox - rename Ping Timeout field to Interval;
winbox - rename SMS Type field to Modem Type;
winbox - rework LTE firmware upgrade buttons into one window;
winbox - show "Switch" related menus only on boards that support such features;
winbox - show all columns under "System/Users/SSH Keys" menu by default;
winbox - use same WireGuard default values as in console;
wireguard - fixed minor memory leak when IPv6 is disabled;
wireguard - improved system stability on busy devices;
wireless - changed CLI snooper column name "freq" to "channel".

Полезные материалы по MikroTik

Углубленный курс «Администрирование сетевых устройств MikroTik»
Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA.

ИП Скоромнов Дмитрий Анатольевич, ИНН 331403723315

На Telegram-канале Mikrotik-сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь

ИП Скоромнов Дмитрий Анатольевич, ИНН 331403723315