MikroTik RouterOS 6.45.x (Long-term)

Материал из MikroTik Wiki
Перейти к навигации Перейти к поиску

Подробное описание изменений в MikroTik RouterOS 6.45.x (Long-term). Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 23 января 2020, дата выхода последнего набора изменений – 30 апреля 2020.

Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам

MikroTik RouterOS 6.45.9

Дата выхода: 30 апреля 2020

Изменения относительно версии 6.45.8:

  • arm - improved watchdog and kernel panic reporting in log after reboots on RB3011 and IPQ4018/IPQ4019 devices ("/system routerboard upgrade" required);
  • capsman - fixed "certificate" parameter updating on CAP;
  • certificate - fixed certificate verification when flushing CRL's;
  • chr - added support for file system quiescing;
  • chr - enabled support for VMBus protocol version 4.1;
  • chr - improved system stability when running CHR on Hyper-V;
  • console - prevent incorrect type interfaces appearing in command hints;
  • crs3xx - fixed frame forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ device;
  • crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
  • crs3xx - fixed switch rule "dst-port" parameter for IPv6 traffic on CRS305-1G-4S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, netPower 15FR devices;
  • crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
  • defconf - added welcome note with common first steps for new users;
  • discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
  • health - fixed maximum SFP temperature reading under '/system health' menu;
  • hotspot - fixed redirect to log in page (introduced in v6.45);
  • ike1 - rekey phase 1 rekeying as responder for Windows initiators;
  • ipsec - improved system stability when handling fragmented packets;
  • led - added "dark-mode" functionality for CRS105-5S-FB;
  • lte - added "phy-cellid" value support for LTE-US;
  • lte - fixed IP type selection from APN on RBSXTLTE3-7;
  • lte - improved system stability when performing firmware update on R11e-LTE6;
  • sniffer - fixed minor typo in "host" menu;
  • snmp - fixed "ifSpeed" reporting for tunnel interfaces;
  • snmp - fixed "routeros-version" value returning from registration table;
  • snmp - fixed UPS battery voltage value scaling;
  • ssh - added support for RSA keys with SHA256 hash (RFC8332);
  • system - correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
  • system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
  • system - improved system stability when receiving/sending TCP traffic on multicore devices;
  • traceroute - improved stability when invalid packet is received;
  • webfig - added default configuration confirmation window to WebFig;
  • webfig - allow skin designing without "ftp" and "sensitive" policies;
  • webfig - do not show WebFig menu when opening 'Check For Updates' in Quick Set;
  • winbox - added "Options" parameter support for DHCPv6 client and server;
  • winbox - added 160Mhz extension channel support for CAPsMAN;
  • winbox - added support for "Tools->WoL" menu;
  • winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
  • winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
  • winbox - fixed "Bands" parameter display for LTE interfaces;
  • winbox - fixed "DSCP" parameter value setting;
  • winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
  • winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
  • winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
  • winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
  • winbox - fixed "invalid" flag presence under "System/Certificates/CRL" menu;
  • winbox - fixed automatic "IPv6->Firewall->Address List" table update;
  • winbox - increased limit of multi-entry fields to 100;
  • winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
  • winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
  • winbox - renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
  • winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
  • wireless - added "skip-dfs-channels" parameter;
  • wireless - allow using FCC "U-NII-2" frequency range for hAP ac2 and RBwAPGR series devices;
  • wireless - fixed default "antenna-gain" setting on SXT 2 devices;
  • wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
  • wireless - improved compatibility for "ETSI" wireless country profile;
  • wireless - improved system stability on hAP ac^2;
  • wireless - updated "bangladesh" regulatory domain information;
  • wireless - updated "indonesia4" regulatory domain information;
  • wireless - updated "south africa" regulatory domain information.

MikroTik RouterOS 6.45.8

Дата выхода: 23 января 2020

Изменения относительно версии 6.45.7:

  • capsman - fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
  • capsman - improved radar detection algorithm;
  • chr - improved stability when changing ARP modes on e1000 type adapters;
  • console - fixed "clear-history" restoring historic actions after power cycle;
  • console - removed "edit" and "set" actions from "System/History" menu;
  • console - updated copyright notice;
  • crs305 - disable optical SFP/SFP+ module Tx power after disabling SFP+ interface;
  • dhcpv4-server - improved stability when RADIUS interim update is sent;
  • dhcpv6-client - fixed timeout when doing rebind;
  • dhcpv6-client - properly update bind time when unused prefix received from the server;
  • dhcpv6-client - properly update IPv6 address on rebind;
  • dhcpv6-server - fixed logged error message when using "address-pool=static-only";
  • dhcpv6-server - ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS;
  • health - fixed health reporting on OmniTIK 5 PoE ac;
  • ipsec - improved system stability when processing decrypted packet on unregistered interface;
  • l2tp - improved system stability when disconnecting many clients at once;
  • led - fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
  • lte - show SIM error when no card is present;
  • ppp - fixed connection establishment when receiving "0.0.0.0" DNS;
  • ppp - fixed minor typo in "ppp-client" monitor;
  • ppp - prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile;
  • qsfp - do not report bogus monitoring readouts on modules without DDMI support;
  • qsfp - improved module monitoring readouts for DAC and break-out cables;
  • routerboard - added "mode-button" support for RBcAP2nD;
  • security - fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded;
  • ssh - fixed output printing when "command" parameter used;
  • timezone - updated time zone database to version 2019c;
  • traffic-generator - improved memory handling on CHR;
  • w60g - fixed "monitor" command on disabled interfaces;
  • winbox - automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
  • winbox - show "LCD" menu only on boards that have LCD screen;
  • wireless - added "ETSI" regulatory domain information;
  • wireless - added "indonesia4" regulatory domain information;
  • wireless - added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
  • wireless - allow using "canada2" regulatory domain on US lock devices;
  • wireless - fixed sensor MAC address reporting in TZSP header;
  • wireless - improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas;
  • wireless - improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
  • wireless - improved IPQ4019, QCA9984, QCA9888 wireless interface stability.
Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам