MikroTik RouterOS 6.43rcX (Testing)

Подробное описание изменений в MikroTik RouterOS 6.43rcX (Testing). Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 20 апреля 2018, дата выхода последнего набора изменений – 28 августа 2018.

Полезные материалы по MikroTik

Углубленный курс "Администрирование сетевых устройств MikroTik"
Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA.

На Telegram-канале Mikrotik сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь

MikroTik RouterOS 6.43rc66

Дата выхода: 28 августа 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
security - fixed vulnerabilities CVE-2018-1156, CVE-2018-1157, CVE-2018-1158, CVE-2018-1159;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

bridge - added support for BPDU Guard;
bridge - added support for DHCP Snooping;
bridge - ignore tagged BPDUs when bridge VLAN filtering is used;
certificate - fixed RA "server-url" setting;
console - added "dont-require-permissions" parameter for scripts;
dhcpv6-client - improved dynamic IPv6 pool addition process;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - fixed AES-192-CTR fallback to software AEAD on ARM devices with wireless and RB3011UiAS-RM;
ipsec - fixed "static-dns" value storing;
ipsec - improved invalid policy handling when a valid policy is uninstalled;
ipsec - separate phase1 proposal configuration from peer menu;
l2tp - allow setting "max-mtu" and "max-mru" bigger than 1500;
lte - fixed LTE registration in 2G/3G mode;
ppp - added support for Telit LM940 modem;
rb3011 - added IPsec hardware acceleration support;
snmp - fixed interface speed reporting for predefined rates;
supout - added "files" section to supout file;
switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chip;
tr069-client - allow editing of "provisioning-code" attribute;
userman - fixed "shared-secret" parameter requiring "sensitive" policy;
webfig - fixed www service becoming unresponsive;
winbox - added "tag-stacking" option to "Bridge/Ports";
winbox - fixed "bad-blocks" value presence under "System/Resources";
winbox - fixed "IP/IPsec/Peers" section sorting;
winbox - renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
wireless - accept only valid path for sniffer output file parameter;
wireless - require "sniff" policy for wireless sniffer.

Другие изменения относительно 6.42.7:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - added per-port based "tag-stacking" feature;
bridge - added support for BPDU Guard (CLI only);
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
bridge - forward LACPDUs when "protocol-mode=none";
bridge - improved packet handling;
bridge - improved packet processing when bridge port changes states;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
bridge - renamed option "vlan-protocol" to "ether-type";
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - do not allow to perform "undo" on certificate changes;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
cloud - added simultaneous IPv4/IPv6 support;
console - added "dont-require-permissions" parameter for scripts;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-client - fixed "add-default-route" parameter;
dhcpv6-client - fixed option handling;
dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dhcpv6-server - do not allow to run DHCPv6 server on slave interface;
dhcpv6-server - fixed dynamic simple queue creation for RADIUS bindings;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)
ethernet - fixed possible link flaps after disabling/enabling the interface (introduced in v6.43rc51);
ethernet - improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
filesystem - improved software crash handling on devices with FLASH type memory;
health - fixed voltage measurements for RB493G devices;
health - improved speed of health measurement readings;
hotspot - allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
hotspot - fixed customized HTML file usage (introduced in 6.43rc47);
hotspot - fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
ike1 - added unsafe configuration warning for main mode with pre-shared-key authentication;
ike1 - purge both SAs when timer expires;
ike1 - zero out reserved bytes in NAT-OA payload;
ike2 - fixed initiator first policy selection;
ike2 - fixed rekeyed child deletion during another exchange;
ike2 - improved basic exchange logging readability;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ippool - improved used address error message;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - fixed AES-CTR and AES-GCM key size proposing as initiator;
ipsec - fixed "static-dns" value storing (CLI only);
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional D-Link PIDs;
lte - added additional ID support for SIM7600 modem;
lte - added additional low endpoint SIM7600 PIDs;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added "registration-status" parameter under "/interface lte info" command;
lte - added roaming status reading for info command (CLI only);
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - ignore empty MAC addresses during Passthrough discovery phase;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
multicast - allow to add more than one RP per IP address for PIM;
ntp - allow to specify link-local address for NTP server;
ospf - improved link-local LSA flooding;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - improved modem mode switching;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
rb1100ahx4 - added DES and 3DES hardware acceleration support;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
routerboot - removed RAM test from TILE devices (routerboot upgrade required);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
sfp - fixed default advertised link speeds;
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
snmp - added "phy-rate" reading for "station-bridge" mode;
snmp - added "temp-exception" trap;
snmp - fixed "remote-cap" peer MAC address format;
ssh - disconnect all active connections when device gets rebooted or turned off;
ssh - strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
switch - fixed possible switch chip hangs after initialization on MediaTek and Atheros8327 switch chips;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tile - added DES and 3DES hardware acceleration support;
tile - fixed false HW offloading flag for MPLS;
tr069-client - allow editing of "provisioning-code" attribute (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - fixed "write-sect-since-reboot" value presence under "System/Resources";
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed "/interface wireless sniffer packet print follow" output;
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 reliability on ARM devices;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc64

Дата выхода: 23 августа 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
security - fixed vulnerabilities CVE-2018-1156, CVE-2018-1157, CVE-2018-1158, CVE-2018-1159;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

bridge - added an option to manually specify ports that have a multicast router (CLI only);
bridge - added a warning when untrusted port receives a DHCP Server message when DCHP Snooping is enabled;
bridge - added more options to fine-tune IGMP Snooping enabled bridges (CLI only);
bridge - added support for DHCP Option 82 (CLI only);
bridge - added support for DHCP Snooping (CLI only);
bridge - added support for IGMP Snooping fast-leave feature (CLI only);
cloud - close local UDP port if no activity;
console - made "once" parameter mandatory when using "as-value" on "monitor" commands;
console - removed automatic swapping of "from=" and "to=" in "for" loops;
crs326/crs328 - fixed packet forwarding when port changes states with IGMP Snooping enabled;
crs3xx - added hardware support for DHCP Snooping and Option 82;
crs3xx - fixed packet forwarding when "frame-type" is changed (introduced in v6.43rc51);
crs3xx - fixed SwOS config import;
defconf - fixed default configuration for RBSXTsq5nD;
dhcpv6-client - fixed false invalid flag (introduced in v6.43rc56);
fetch - added "as-value" output format;
fetch - fixed address and DNS verification in certificates;
health - added missing parameters from export;
ipsec - added warning messages for incorrect peer configuration;
ipsec - improved stability when using IPsec with disabled route cache;
leds - fixed LED behaviour when bonding is configured on SFP+ interfaces;
lte - added "sector-id" to info command;
lte - fixed SIM7600 series module support with newer device IDs;
ppp - added support for Alfa Network U4G modem;
rb3011 - added IPsec hardware acceleration support;
snmp - added EAP identity to CAPsMAN registration table;
supout - added monitored bridge VLAN table to supout file;
switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chips;
tr069-client - use SNI extension for HTTPS;
ups - improved UPS serial parsing stability;
w60g - added "beamforming-event" stats counter;
w60g - fixed random disconnects;
w60g - general stability and performance improvements;
wireless - accept only valid path for sniffer output file parameter;
wireless - added "czech republic 5.8" regulatory domain information;
wireless - added "etsi2" regulatory domain information;
wireless - added option to disable PMKID for WPA2;
wireless - updated "czech republic" regulatory domain information.

Другие изменения относительно 6.42.7:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - added per-port based "tag-stacking" feature;
bridge - added support for BPDU Guard (CLI only);
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
bridge - forward LACPDUs when "protocol-mode=none";
bridge - improved packet handling;
bridge - improved packet processing when bridge port changes states;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
bridge - renamed option "vlan-protocol" to "ether-type";
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - do not allow to perform "undo" on certificate changes;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
cloud - added simultaneous IPv4/IPv6 support;
console - added "dont-require-permissions" parameter for scripts;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-client - fixed "add-default-route" parameter;
dhcpv6-client - fixed option handling;
dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dhcpv6-server - do not allow to run DHCPv6 server on slave interface;
dhcpv6-server - fixed dynamic simple queue creation for RADIUS bindings;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)
ethernet - fixed possible link flaps after disabling/enabling the interface (introduced in v6.43rc51);
ethernet - improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
filesystem - improved software crash handling on devices with FLASH type memory;
health - fixed voltage measurements for RB493G devices;
health - improved speed of health measurement readings;
hotspot - allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
hotspot - fixed customized HTML file usage (introduced in 6.43rc47);
hotspot - fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
ike1 - added unsafe configuration warning for main mode with pre-shared-key authentication;
ike1 - purge both SAs when timer expires;
ike1 - zero out reserved bytes in NAT-OA payload;
ike2 - fixed initiator first policy selection;
ike2 - fixed rekeyed child deletion during another exchange;
ike2 - improved basic exchange logging readability;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ippool - improved used address error message;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - fixed AES-CTR and AES-GCM key size proposing as initiator;
ipsec - fixed "static-dns" value storing (CLI only);
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional D-Link PIDs;
lte - added additional ID support for SIM7600 modem;
lte - added additional low endpoint SIM7600 PIDs;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added "registration-status" parameter under "/interface lte info" command;
lte - added roaming status reading for info command (CLI only);
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - ignore empty MAC addresses during Passthrough discovery phase;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
multicast - allow to add more than one RP per IP address for PIM;
ntp - allow to specify link-local address for NTP server;
ospf - improved link-local LSA flooding;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - improved modem mode switching;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
rb1100ahx4 - added DES and 3DES hardware acceleration support;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
routerboot - removed RAM test from TILE devices (routerboot upgrade required);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
sfp - fixed default advertised link speeds;
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
snmp - added "phy-rate" reading for "station-bridge" mode;
snmp - added "temp-exception" trap;
snmp - fixed "remote-cap" peer MAC address format;
ssh - disconnect all active connections when device gets rebooted or turned off;
ssh - strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
switch - fixed possible switch chip hangs after initialization on MediaTek and Atheros8327 switch chips;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tile - added DES and 3DES hardware acceleration support;
tile - fixed false HW offloading flag for MPLS;
tr069-client - allow editing of "provisioning-code" attribute (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - fixed "write-sect-since-reboot" value presence under "System/Resources";
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed "/interface wireless sniffer packet print follow" output;
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 reliability on ARM devices;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc56

Дата выхода: 13 августа 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

security - fixed vulnerabilities CVE-2018-1156, CVE-2018-1157, CVE-2018-1158, CVE-2018-1159;
bridge - added support for BPDU Guard (CLI only);
bridge - added support for DHCP Option 82 (disables hardware offloading, CLI only);
bridge - added support for DHCP Snooping (disables hardware offloading, CLI only);
bridge - forward LACPDUs when "protocol-mode=none";
bridge - improved packet handling;
cloud - added simultaneous IPv4/IPv6 support;
console - added "dont-require-permissions" parameter for scripts;
dhcpv4-relay - fixed false invalid flag presence;
dhcpv6-server - do not allow to run DHCPv6 server on slave interface;
dhcpv6-server - fixed dynamic simple queue creation for RADIUS bindings;
dhcpv6-server - properly update interface for dynamic DHCPv6 servers;
ethernet - fixed possible link flaps after disabling/enabling the interface (introduced in v6.43rc51);
ethernet - improved large packet handling on ARM devices with wireless;
ethernet - removed obsolete slave flag from "/interface vlan" menu;
hotspot - fixed customized HTML file usage (introduced in 6.43rc47);
ike1 - zero out reserved bytes in NAT-OA payload;
ike2 - fixed initiator first policy selection;
ippool - improved used address error message;
ipsec - added warning messages for incorrect peer configuration;
ipsec - separate phase1 proposal configuration from peer menu;
ppp - fixed interface enabling after a while if none of them where active;
ppp - improved modem mode switching;
snmp - added "temp-exception" trap;
switch - fixed possible switch chip hangs after initialization on MediaTek and Atheros8327 switch chips;
tile - fixed false HW offloading flag for MPLS;
tr069-client - allow editing of "provisioning-code" attribute (CLI only);
tr069-client - fixed unresponsive tr069 service when blackhole route is present;
upgrade - fixed RouterOS upgrade process from RouterOS v5;
ups - improved UPS serial parsing stability;
w60g - general stability and performance improvements;
w60g - stop doing distance measurements after first successful measurement;
winbox - added "default-route-distance" parameter for "IPv6/DHCP-client" menu;
winbox - fixed "sfp-connector-type" value presence under "Interface/Ethernet";
winbox - fixed warning presence for "IP/IPsec/Peers" menu;
winbox - fixed "write-sect-since-reboot" value presence under "System/Resources";
winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
wireless - added option to disable PMKID for WPA2 (CLI only);
wireless - fixed memory leak when performing wireless scan on ARM;
wireless - updated "united-states" regulatory domain information.

Другие изменения относительно 6.42.6:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6 - improved reliability on IPv6 DHCP services;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
health - improved speed of health measurement readings;
ike1 - purge both SAs when timer expires;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
package - do not allow to install out of bundle package if it already exists within bundle;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed compatibility with PayPal TLS 1.2;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - temporary disabled distance measurement feature;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc51

Дата выхода: 1 августа 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

bridge - added per-port based "tag-stacking" feature;
bridge - fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
bridge - improved bridge port state changing process;
bridge - improved packet processing when bridge port changes states;
bridge - renamed option "vlan-protocol" to "ether-type";
certificate - do not allow to perform "undo" on certificate changes;
crs3xx - added command that forces fan detection on fan-equipped devices;
crs3xx - fixed port disable on CRS326 and CRS328 devices;
dhcpv6-client - allow to set "default-route-distance";
dhcpv6-client - fixed "add-default-route" parameter;
dhcpv6-client - fixed option handling;
dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
ethernet - fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)
filesystem - fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
health - fixed voltage measurements for RB493G devices;
hotspot - allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
hotspot - fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
ike1 - added unsafe configuration warning for main mode with pre-shared-key authentication;
ike1 - zero out reserved bytes in NAT-OA payload;
ike2 - fixed rekeyed child deletion during another exchange;
ike2 - improved basic exchange logging readability;
ipsec - fixed "sa-src-address" deduction from "src-address" in tunnel mode;
ipsec - fixed "static-dns" value storing (CLI only);
ipsec - fixed AES-CTR and AES-GCM key size proposing as initiator;
ldp - properly load LDP configuration;
led - fixed default LED configuration for RBLHGG-5acD-XL devices;
lte - added "registration-status" parameter under "/interface lte info" command;
lte - added additional D-Link PIDs;
lte - added additional low endpoint SIM7600 PIDs;
lte - added signal readings under "/interface lte scan" for 3G and GSM modes;
lte - fixed memory leak on USB disconnect;
lte - fixed SMS send feature when not in LTE network;
lte - ignore empty MAC addresses during Passthrough discovery phase;
lte - properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
multicast - allow to add more than one RP per IP address for PIM;
ospf - improved link-local LSA flooding;
rb1100ahx4 - added DES and 3DES hardware acceleration support;
routerboot - removed RAM test from TILE devices (routerboot upgrade required);
sfp - hide "sfp-wavelength" parameter for RJ45 transceivers;
snmp - added "phy-rate" reading for "station-bridge" mode;
snmp - fixed "remote-cap" peer MAC address format;
ssh - strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
tile - added DES and 3DES hardware acceleration support;
w60g - added distance measurement feature;
w60g - fixed random disconnects;
w60g - improved MCS rate detection process;
w60g - improved MTU change handling;
w60g - properly close connection with station on disconnect;
wireless - fixed "/interface wireless sniffer packet print follow" output;
wireless - fixed packet processing after removing wireless interface from CAP settings.

Другие изменения относительно 6.42.6:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6 - improved reliability on IPv6 DHCP services;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
health - improved speed of health measurement readings;
ike1 - purge both SAs when timer expires;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
package - do not allow to install out of bundle package if it already exists within bundle;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed compatibility with PayPal TLS 1.2;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - temporary disabled distance measurement feature;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc45

Дата выхода: 17 июля 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

ethernet - improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);
ipsec - improved invalid policy handling when a valid policy is uninstalled;
lte - added additional ID support for SIM7600 modem;
sfp - fixed default advertised link speeds;
vrrp - fixed VRRP packet processing on VirtualBox and VMWare hypervisors;
winbox - properly display all flags for bridge host entries;
winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
wireless - improved Nv2 reliability on ARM devices.

Другие изменения относительно 6.42.6:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6 - improved reliability on IPv6 DHCP services;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
health - improved speed of health measurement readings;
ike1 - purge both SAs when timer expires;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for alternative SIM7600 PID;
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
package - do not allow to install out of bundle package if it already exists within bundle;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
sms - improved reliability on SMS reader;
snmp - added CAPsMAN "remote-cap" table;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed compatibility with PayPal TLS 1.2;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - temporary disabled distance measurement feature;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added bridge Fast Forward statistics counters;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
winbox - show "Switch" menu on hAP ac^2 devices;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc44

Дата выхода: 11 июля 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
dhcpv6 - improved reliability on IPv6 DHCP services;
lte - added support for alternative SIM7600 PID;
sms - improved reliability on SMS reader;
w60g - temporary disabled distance measurement feature.

Другие изменения относительно 6.42.6:

backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
check-installation - improved system integrity checking;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved balooning process;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
chr - reduced RAM memory required per interface;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
health - improved speed of health measurement readings;
ike1 - purge both SAs when timer expires;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
package - do not allow to install out of bundle package if it already exists within bundle;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
routerboard - fixed wrongly reported RAM size on ARM devices;
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
snmp - added CAPsMAN "remote-cap" table;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed compatibility with PayPal TLS 1.2;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc42

Дата выхода: 4 июля 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - added support for licensed CHR instances (including trial);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
check-installation - improved system integrity checking;
chr - fixed interface name order when "virtio-net is not being used on KVM installations;
chr - improved balooning process;
chr - reduced RAM memory required per interface;
defconf - fixed bridge default configuration for SOHO devices with more than 9 Ethernet interfaces;
health - improved speed of health measurement readings;
interface - improved interface "last-link-down-time" and "last-link-up-time" values;
package - free up used storage space consumed by old RouterOS upgrades;
routerboard - fixed wrongly reported RAM size on ARM devices;
snmp - fixed w60g "phy-rate" readings;
w60g - general stability and performance improvements;
winbox - added 64,6 GHz frequency to w60g interface frequency settings.

Другие изменения относительно 6.42.5:

backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
bridge - properly handle packets when bridge port changes states
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs317 - properly report link state when one side has disabled interface;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed LACP member failover;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
ethernet - properly handle Ethernet interface default configuration;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
ike1 - purge both SAs when timer expires;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
package - do not allow to install out of bundle package if it already exists within bundle;
package - renamed "current-version" to "installed-version" under "/system package install";
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - converted "keep-max-sms" feature to "auto-erase";
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
snmp - added CAPsMAN "remote-cap" table;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "ip-cloud" section to supout file;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed modem initialisation on LtAP mini;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - fixed compatibility with PayPal TLS 1.2;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - do not reset interface after adding comment;
watchdog - added "ping-timeout" setting;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "sector-writes" on devices that have such counters;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc40

Дата выхода: 2 июля 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - added IPv6 support;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

cloud - added support for licensed CHR instances (including trial);
bridge - properly handle packets when bridge port changes states
crs317 - properly report link state when one side has disabled interface;
ethernet - properly handle Ethernet interface default configuration;
ike2 - use "/32" netmask by default on initiator if not provided by responder;
package - do not allow to install out of bundle package if it already exists within bundle;
package - free up used storage space consumed by old RouterOS upgrades;
package - renamed "current-version" to "installed-version" under "/system package install";
sms - converted "keep-max-sms" feature to "auto-erase";
snmp - added CAPsMAN "remote-cap" table;
supout - added "ip-cloud" section to supout file;
usb - fixed modem initialisation on LtAP mini;
userman - fixed compatibility with PayPal TLS 1.2;
w60g - do not reset interface after adding comment;
watchdog - added "ping-timeout" setting;
winbox - show "sector-writes" on devices that have such counters;
winbox - show "Switch" menu on hAP ac^2 devices.

Другие изменения относительно 6.42.5:

backup - generate proper file name when devices identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
console - do not show spare parameters on ping command;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed flow control;
crs3xx - fixed LACP member failover;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-client - fixed double ACK packet handling;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
ethernet - do not show "combo-state" field if interface is not SFP or copper;
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
ike1 - purge both SAs when timer expires;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added eNB ID to info command;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
ssh - disconnect all active connections when device gets rebooted or turned off;
supout - added "w60g" section to supout file;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the device at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc34

Дата выхода: 21 июня 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility;
winbox - minimal required version is v3.15.

Изменения:

cloud - added IPv6 support;
console - do not show spare parameters on ping command;
crs317 - properly report link state when one link interface is disabled;
crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
crs3xx - fixed flow control;
crs3xx - fixed LACP member failover;
dhcpv4-client - fixed double ACK packet handling;
ethernet - do not show "combo-state" field if interface is not SFP or copper;
led - fixed LED default configuration for LtAP mini;
lte - added eNB ID to info command;
ssh - allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled;
supout - added "w60g" section to supout file;
watchdog - added "ping-timeout" setting (CLI only);
winbox - show "sector-writes" on ARM routers that has such counters;
winbox - show "System/Health" only on boards that have health monitoring.

Другие изменения относительно 6.42.4:

api - properly classify API sessions in log;
backup - generate proper file name when router identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
dude - fixed client auto upgrade (broken since 6.43rc17);
export - do not show w60g password on "hide-sensitive" type of export;
filesystem - improved software crash handling on devices with FLASH type memory;
ike1 - purge both SAs when timer expires;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - show UICC in correct format for SXT LTE devices;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
romon - properly classify RoMON sessions in log and active users list;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added 4th 802.11ad channel (CLI only);
w60g - added distance measurement (CLI only);
w60g - general stability and performance improvements;
w60g - improved link stability;
w60g - improved maximal achievable distance;
w60g - improved maximum link distance;
w60g - properly report center status under "tx-sector-info";
w60g - removed distance lock for wAP 60G devices;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the router at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;
x86 - improved Ethernet driver for Davicom DM9x0x.

MikroTik RouterOS 6.43rc32

Дата выхода: 19 июня 2018 Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility.

Изменения:

winbox - minimal required version is v3.15;
api - properly classify API sessions in log;
bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
chr - enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V;
crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
dude - fixed client auto upgrade (broken since 6.43rc17);
export - do not show w60g password on "hide-sensitive" type of export;
log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
lte - show UICC in correct format for SXT LTE devices;
romon - properly classify RoMON sessions in log and active users list;
w60g - improved maximal achievable distance;
w60g - properly report center status under "tx-sector-info".

Другие изменения относительно 6.42.4:

backup - generate proper file name when router identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - reduced resource usage of DHCP services;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
ike1 - purge both SAs when timer expires;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
ppp - added support for additional ID for E3531 modem;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
smb - fixed valid request handling when additional options are used;
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed power-reset for hAP ac^2 devices;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added 4th 802.11ad channel (CLI only);
w60g - added distance measurement (CLI only);
w60g - general stability and performance improvements;
w60g - improved link stability;
w60g - improved maximum link distance;
w60g - removed distance lock for wAP 60G devices;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the router at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information.

MikroTik RouterOS 6.43rc29

Дата выхода: 13 июня 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required).

Изменения:

dhcp - reduced resource usage of DHCP services;
ipsec - improved reliability on IPsec hardware encryption for RB1100Dx4;
led - added "dark-mode" functionality for SXTsq 5 ac devices;
led - use routers uptime as a starting point when turning off LEDs if option was not enabled on boot;
sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
w60g - improved maximum link distance;
w60g - improved RAM memoy allocation processes;
wireless - improved Nv2 reliability on ARM devices.

Другие изменения относительно 6.42.3:

backup - generate proper file name when router identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - fixed "add-scep" template existence check when signing certificate;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations (might require more RAM assigned than in previous versions);
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed adding MSTI entries;
chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - fixed various network hang scenarios when running CHR on Hyper-V;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
console - fixed script permissions if script is executed by other RouterOS service;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - fixed DHCP server stuck in invalid state;
dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - fixed DHCP server that was stuck on invalid state;
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
health - changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
health - fixed incorrect PSU index for CRS328-4C-20S-4S+;
ike1 - purge both SAs when timer expires;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
ipsec - use monotonic timer for SA lifetime check;
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
kidcontrol - allow to edit discovered devices;
kidcontrol - fixed dynamically created firewall rules order;
led - added "dark-mode" functionality for hEX S devices;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added additional ID support for SIM7600 modem;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - added support for Quanta 1k6e modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ntp - allow to specify link-local address for NTP server;
ppp - added support for additional ID for E3531 modem;
ppp - fixed "hunged up" grammar to "hung up" within PPP log messages;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - added missing wireless "channel-width" settings;
quickset - added support for "5ghz-a/n" band when CPE mode is used;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
snmp - added remote CAP count OID for CAPsMAN;
snmp - fixed readings for CAPsMAN slave interfaces;
ssh - disconnect all active connections when router gets rebooted or turned off;
supout - added "partitions" section to supout file;
switch - added support for port isolation by switch chip;
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
usb - fixed power-reset for hAP ac^2 devices;
usb - properly detect USB 3.0 flash on RBM33G when jumper is removed;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
userman - improved unique username generation process when adding batch of users;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added 4th 802.11ad channel (CLI only);
w60g - added distance measurement (CLI only);
w60g - general stability and performance improvements;
w60g - improved link stability;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
winbox - allow to specify full URL in SCEP certificate signing process;
winbox - by default specify keepalive timeout value for tunnel type interfaces;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the router at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "scep-url" for certificates;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show "System/Health" only on boards that have health monitoring;
winbox - show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information.

MikroTik RouterOS 6.43rc27

Дата выхода: 12 июня 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required).

Изменения:

dhcpv4-client - fixed DHCP client that was stuck on invalid state;
dhcpv4-server - fixed DHCP server that was stuck on invalid state;
health - changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
health - fixed incorrect PSU index for CRS328-4C-20S-4S+;
ike1 - purge both SAs when timer expires;
ipsec - use monotonic timer for SA lifetime check;
led - added "dark-mode" functionality for hEX S devices;
lte - added additional ID support for SIM7600 modem;
lte - added support for Quanta 1k6e modem;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved readings of info command results for the SXT LTE;
lte - improved stability of USB LTE interface detection process;
ntp - allow to specify link-local address for NTP server;
ppp - added support for additional ID for E3531 modem;
snmp - added remote CAP count OID for CAPsMAN;
snmp - fixed readings for CAPsMAN slave interfaces;
usb - fixed power-reset for hAP ac^2 devices;
usb - properly detect USB 3.0 flash on RBM33G when jumper is removed;
userman - improved unique username generation process when adding batch of users;
w60g - added distance measurement (CLI only);
w60g - improved link stability;
w60g - improved maximum link distance;
wireless - improved Nv2 reliability on ARM devices.

Другие изменения относительно 6.42.3:

backup - generate proper file name when router identity is longer than 32 symbols;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
capsman - allow to change "radio-name" (CLI only);
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - fixed "add-scep" template existence check when signing certificate;
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - do not show IRQ entries from removed devices;
chr - fixed adding MSTI entries;
chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed NIC hotplug for "virtio-net";
chr - fixed various network hang scenarios when running CHR on Hyper-V;
chr - improved boot time for Hyper-V installations;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
console - fixed script permissions if script is executed by other RouterOS service;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - fixed DHCP server stuck in invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu;
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
kidcontrol - allow to edit discovered devices;
kidcontrol - fixed dynamically created firewall rules order;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved modem event processing;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
ppp - fixed "hunged up" grammar to "hung up" within PPP log messages;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - added missing wireless "channel-width" settings;
quickset - added support for "5ghz-a/n" band when CPE mode is used;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
ssh - disconnect all active connections when router gets rebooted or turned off;
supout - added "partitions" section to supout file;
switch - added support for port isolation by switch chip;
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added 4th 802.11ad channel (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added bridge Fast Forward statistics counters;
winbox - added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
winbox - allow to specify full URL in SCEP certificate signing process;
winbox - by default specify keepalive timeout value for tunnel type interfaces;
winbox - fixed arrow key handling within table filter fields;
winbox - fixed bridge port MAC learning parameter values;
winbox - properly close session when uploading multiple files to the router at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "scep-url" for certificates;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show "System/Health" only on boards that have health monitoring;
winbox - show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information.

MikroTik RouterOS 6.43rc23

Дата выхода: 3 июня 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required).

Изменения:

backup - generate proper file name when router identity is longer than 32 symbols;
bridge - added ingress filtering options to bridge interface;
bridge - added initial Q-in-Q support;
capsman - increase timeout for the CAP to CAPsMAN communication;
certificate - added "expires-after" parameter;
certificate - fixed "add-scep" template existence check when signing certificate;
chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
chr - fixed interface name assign process when running CHR on Hyper-V;
chr - fixed MTU changing process when running CHR on Hyper-V;
chr - fixed various network hang scenarios when running CHR on Hyper-V;
chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
console - fixed script permissions if script is executed by other RouterOS service;
dhcpv6-server - added initial dynamic simple queue support;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
ipsec - separate phase1 proposal configuration from peer menu;
lte - improved modem event processing;
ppp - fixed "hunged up" grammar to "hung up" within PPP log messages;
ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
quickset - added missing wireless "channel-width" settings;
quickset - added support for "5ghz-a/n" band when CPE mode is used;
quickset - recognize 160 MHz channel as HomeAP mode;
romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
supout - added "partitions" section to supout file;
switch - added support for port isolation by switch chip;
webfig - properly display time interval within Kid Control menu;
webfig - properly show NTP clients "last-adjustment" value;
winbox - added "poe-fault" LED trigger;
winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
winbox - added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
winbox - allow to specify full URL in SCEP certificate signing process;
winbox - fixed arrow key handling within table filter fields;
winbox - properly close session when uploading multiple files to the router at the same time;
winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
winbox - show "scep-url" for certificates;
winbox - show "System/Health" only on boards that have health monitoring;
winbox - show firmware upgrade message at the bottom of "System/RouterBOARD" menu.

Другие изменения относительно 6.42.3:

bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
capsman - allow to change "radio-name" (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed adding MSTI entries;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - fixed DHCP server stuck in invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
kidcontrol - allow to edit discovered devices;
kidcontrol - fixed dynamically created firewall rules order;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to remove default APN profile;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
ssh - disconnect all active connections when router gets rebooted or turned off;
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added 4th 802.11ad channel (CLI only);
w60g - added distance measurement (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
winbox - added bridge Fast Forward statistics counters;
winbox - by default specify keepalive timeout value for tunnel type interfaces;
winbox - fixed bridge port MAC learning parameter values;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information.

MikroTik RouterOS 6.43rc21

Дата выхода: 29 мая 2018

Важные изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
backup - do not encrypt backup file unless password is provided;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required).

Изменения:

dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
dhcp - fixed DHCP server stuck in invalid state;
dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
lte - do not allow to remove default APN profile;
snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
w60g - added distance measurement (CLI only);
winbox - by default specify keepalive timeout value for tunnel type interfaces;
winbox - show "System/Health" only on boards that have health monitoring;
wireless - added option for RADIUS "called-station-id" format selection;
wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information.

Другие изменения относительно 6.42.3:

bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface (CLI only);
bridge - added initial Q-in-Q support (CLI only);
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
capsman - allow to change "radio-name" (CLI only);
certificate - add "expires-after" parameter (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed adding MSTI entries;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-client - added missing "Server identifier" parameter in release message;
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu (CLI only);
kidcontrol - allow to edit discovered devices;
kidcontrol - fixed dynamically created firewall rules order;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
w60g - added 4th 802.11ad channel (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed bridge port MAC learning parameter values;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices.

MikroTik RouterOS 6.43rc19

Дата выхода: 25 мая 2018

Изменения:

api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
bridge - fixed FastPath for bridge master interfaces (introduce in v6.42);
chr - fixed adding MSTI entries;
dhcpv6-client - added missing "Server identifier" parameter in release message;
kidcontrol - fixed dynamically created firewall rules order;
lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
w60g - added distance measurement (CLI only).

Другие изменения относительно 6.42.3:

backup - do not encrypt backup file unless password is provided;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface (CLI only);
bridge - added initial Q-in-Q support (CLI only);
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
capsman - allow to change "radio-name" (CLI only);
certificate - add "expires-after" parameter (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
defconf - fixed missing bridge ports after configuration reset;
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu (CLI only);
kidcontrol - allow to edit discovered devices;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added roaming status reading for info command (CLI only);
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved r11e-LTE configuration exchange process;
lte - improved reading of SMS message after entering running state;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
lte - use alphanumeric operator format in info command;
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
smb - fixed valid request handling when additional options are used;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
w60g - added 4th 802.11ad channel (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
webfig - improved authentication process;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed bridge port MAC learning parameter values;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADUS "called-station-id" format selection (CLI only);
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - fixed wireless interface lockup after period of inactivity;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices.

MikroTik RouterOS 6.43rc17

Дата выхода: 23 мая 2018

Изменения:

backup - do not encrypt backup file unless password is provided;
bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added initial Q-in-Q support (CLI only);
btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
crs3xx - fixed VLAN filtering when there is no tagged interface specified;
lte - added ICCID reading for info command R11e-LTE (CLI only);
lte - added roaming status reading for info command (CLI only);
lte - improved r11e-LTE configuration exchange process;
lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
lte - use alphanumeric operator format in info command;
mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
radius - use MS-CHAPv2 for "login" service authentication;
romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
smb - fixed valid request handling when additional options are used;
user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
w60g - added 4th 802.11ad channel (CLI only);
w60g - general stability and performance improvements;
w60g - improved maximal achievable distance;
w60g - removed distance lock for wAP 60G devices;
webfig - improved authentication process;
winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
wireless - fixed wireless interface lockup after period of inactivity;
wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates;
wireless - improved client "channel-width" detection.

Другие изменения относительно 6.42.2:

bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface (CLI only);
bridge - allow to make changes for bridge port when it is interface list;
bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
capsman - allow to change "radio-name" (CLI only);
certificate - add "expires-after" parameter (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
defconf - fixed missing bridge ports after configuration reset;
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu (CLI only);
kidcontrol - allow to edit discovered devices;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EP06 modem;
lte - added support for Novatel USB730LN modem with new ID;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved reading of SMS message after entering running state;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed bridge port MAC learning parameter values;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADUS "called-station-id" format selection (CLI only);
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - improved Nv2 PtMP performance;
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices.

MikroTik RouterOS 6.43rc14

Дата выхода: 18 мая 2018

Изменения:

bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
bridge - added ingress filtering options to bridge interface (CLI only);
bridge - added initial Q-in-Q support (CLI only);
bridge - allow to make changes for bridge port when it is interface list;
crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
defconf - fixed missing bridge ports after configuration reset;
ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
lte - added support for Novatel USB730LN modem with new ID;
routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices.

Другие изменения относительно 6.42.2:

bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
bridge - fixed dynamic VLAN table entries when using ingress filtering;
capsman - allow to change "radio-name" (CLI only);
certificate - add "expires-after" parameter (CLI only);
chr - added checksum offload support for Hyper-V installations;
chr - added large send offload support for Hyper-V installations;
chr - added multiqueue support on Xen installations;
chr - added support for multiqueue feature on "virtio-net";
chr - added virtual Receive Side Scaling support for Hyper-V installations;
chr - do not show IRQ entries from removed devices;
chr - fixed NIC hotplug for "virtio-net";
chr - improved boot time for Hyper-V installations;
crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
dhcpv6-server - added initial dynamic simple queue support;
filesystem - improved software crash handling on devices with FLASH type memory;
interface - improved reliability on dynamic interface handling;
ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
ipsec - added warning messages for incorrect peer configuration;
ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
ipsec - install all DNS server addresses provided by "mode-config" server;
ipsec - separate phase1 proposal configuration from peer menu (CLI only);
kidcontrol - allow to edit discovered devices;
led - improved w60g alignment trigger;
log - show interface name on OSPF "different MTU" info log messages;
lte - added extended LTE signal info for SIM7600 modules;
lte - added extended signal information for Quectel LTE EP06 modem;
lte - allow to execute concurrent internal AT commands;
lte - allow to use multiple PLS modems at the same time;
lte - do not allow to send "at-chat" commands for configless modems;
lte - expose GPS channel for PLS modems;
lte - fixed SIM7600 registration info;
lte - improved r11e-LTE and r11e-LTE-US dialling process;
lte - improved reading of SMS message after entering running state;
lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
ssh - disconnect all active connections when router gets rebooted or turned off;
switch - added support for port isolation by switch chip (CLI only);
tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
winbox - added bridge Fast Forward statistics counters;
winbox - fixed bridge port MAC learning parameter values;
winbox - show "Switch" menu on hAP ac^2 devices;
winbox - show HT MCS tab when "5ghz-n/ac" band is used;
wireless - added option for RADUS "called-station-id" format selection (CLI only);
wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
wireless - improved Nv2 PtMP performance.