MikroTik RouterOS 6.42rcX (Testing)

Материал из MikroTik Wiki
Перейти к навигации Перейти к поиску

Подробное описание изменений в MikroTik RouterOS 6.42rcX (Testing). Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 27 декабря 2017, дата выхода последнего набора изменений – 9 апреля 2018.

Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам

MikroTik RouterOS 6.42rc56

Дата выхода: 9 апреля 2018

Изменения:

  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dns - do not generate "Undo" messages on changes to dynamic servers;
  • ike2 - fixed framed IP address received from RADIUS server;
  • ippool6 - added pool name to "no more addresses left" error message;
  • ipv6 - fixed IPv6 behavior when slave leaves bridge;
  • ipv6 - update IPv6 DNS from RA only when it is changed;
  • led - added "Dark Mode" support for wAP 60G;
  • led - added w60g alignment trigger;
  • rb1100ahx4 - improved reliability on hardware encryption;
  • w60g - added "tx-power" setting (CLI only);
  • w60g - added RSSI information (CLI only);
  • w60g - added TX sector alignment information (CLI only);
  • winbox - fixed Neighbor Discovery and MAC Winbox (introduced in v6.42rc);
  • wireless - fixed RB911-5HnD low transmit power issue;
  • wireless - fixed wsAP wrong 5 GHz interface MAC address.

Другие изменения относительно 6.41.3:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • w60g - increased supported distance for wAP 60G to 200+ meters;
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs326 - fixed known multicast flooding to the CPU;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc52

Дата выхода: 27 марта 2018

Изменения:

  • bridge - fixed "master-port" configuration conversion from pre-v6.41 RouterOS versions (introduced in 6.42rc);
  • certificate - fixed incorrect SCEP URL after an upgrade;
  • chr - added support for "multi-queue" feature for "virtio-net" driver;
  • chr - added support for Amazon Elastic Network Adapter (ENA) driver;
  • chr - added support for booting from NVMe disks;
  • chr - fixed interface matching by name on VMware installations;
  • chr - run startup scripts also on the first boot on AWS and Google Cloud installations;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
  • lte - added initial support for Quectel LTE EP06-E;
  • lte - fixed LTE band setting for SXT LTE;
  • routerboard - properly detect hAP ac^2 RAM size;
  • ssh - fixed SSH service becoming unavailable;
  • traffic-flow - fixed IPv6 destination address value when IPFIX protocol is used;
  • watchdog - retry to send "autosupout.rif" file to an e-mail if initial delivery failed up to 3 times within 20 second interval.

Другие изменения относительно 6.41.3:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • w60g - increased supported distance for wAP 60G to 200+ meters;
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs326 - fixed known multicast flooding to the CPU;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc49

Дата выхода: 21 марта 2018

Изменения:

  • w60g/Wireless-Wire - increased supported distance for wAP 60G to 200+ meters.

Другие изменения относительно 6.41.3:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs326 - fixed known multicast flooding to the CPU;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc48

Дата выхода: 21 марта 2018

Изменения:

  • health - fixed empty measurements on CRS328-24P-4S+RM;
  • led - removed unused "link-act-led" trigger for devices which does not use it;
  • ups - improved communication between router and UPS;
  • wireless - improved Nv2 PtMP performance.

Другие изменения относительно 6.41.3:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs326 - fixed known multicast flooding to the CPU;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc46

Дата выхода: 20 марта 2018

Изменения:

  • dhcp - improved DHCP service reliability when it is configured on bridge interface;
  • dhcp - reduced resource usage of DHCP services;
  • netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
  • quickset - by default use "/24" subnet for local network;
  • quickset - properly detect IP address when one of the bridge modes is used;
  • routerboot - fixed RouterBOOT upgrade process (introduced in v6.42rc);
  • winbox - added "use-dn" setting in OSPF instance General menu;
  • winbox - moved OSPF instance "routing-table" setting in OSPF instance General menu;
  • winbox - use proper graph name for HDD graphs;
  • wireless - improved Nv2 PtMP performance.

Другие изменения относительно 6.41.3:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs326 - fixed known multicast flooding to the CPU;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc43

Дата выхода: 15 марта 2018

Изменения:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • crs326 - fixed known multicast flooding to the CPU;
  • dhcp - improved DHCP service reliability when it is configured on bridge interface;
  • ssh - generate SSH keys only on the first connect attempt instead of the first boot;
  • ups - improved disconnect message handling between RouterOS and UPS;
  • wireless - enable all chains by default on devices without external antennas after configuration reset.

Другие изменения относительно 6.41.3:

  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - added "board-name" OID;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc41

Дата выхода: 12 марта 2018

Изменения:

  • ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
  • snmp - added "board-name" OID.

Другие изменения относительно 6.41.3:

  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
  • bridge - added per-port learning options (CLI only);
  • bridge - added support for static hosts;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcp - improved DHCP service reliability when it is configured on bridge interface;
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • email - set maximum number of sessions to 100;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • fetch - increased maximum number of sessions to 100;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed wildcard policy lookup on responder;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • userman - added support for ARM and MMIPS platform;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - show Bridge Port PVID column by default;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc39

Дата выхода: 7 марта 2018

Изменения:

  • bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts;
  • bridge - added per-port learning options;
  • bridge - added support for static hosts;
  • bridge - fixed reliability on software bridges when used on devices without switch chip;
  • capsman - added "allow-signal-out-of-range" option for Access List entries;
  • capsman - added support for "interface-list" in Access List and Datapath entries;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
  • crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
  • crs3xx - added switch port "storm-rate" limiting options;
  • dhcp - improved DHCP service reliability when it is configured on bridge interface;
  • email - set maximum number of sessions to 100;
  • fetch - increased maximum number of sessions to 100;
  • ike1 - fixed wildcard policy lookup on responder;
  • quickset - fixed NAT if PPPoE client is used for Internet access;
  • winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
  • winbox - moved "ageing-time" setting from STP to General tab;
  • winbox - added "antenna" setting under GPS settings for MIPS platform devices;
  • winbox - added 160 MHz "channel-width" to wireless settings;
  • winbox - added broadcast and flood settings to bridge ports;
  • winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
  • winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
  • winbox - fixed maximal ID for Traffic Generator stream;
  • winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
  • winbox - removed Enable and Disable buttons from IPsec "mode-config" list;
  • winbox - show "D" flag under "/ip dhcp-client" menu;
  • winbox - show CQI in LTE info;
  • winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
  • wireless - added support for "band=5ghz-n/ac";
  • wireless - added support for "interface-list" for Access List entries;
  • wireless - added support for legacy AR9485 chipset;
  • wireless - improved wireless scan functionality.

Другие изменения относительно 6.41.2:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - added host aging timer for crs3xx and Atheros hw-bridges;
  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - fixed MAC learning for VRRP interfaces on bridge;
  • bridge - hide options for disabled bridge features in CLI;
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • capsman - log "signal-strength" when successfully connected to AP;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed additional disk detaching on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - do not allow variables that start with digit to be referenced without $ sign;
  • console - improved console stability after it has not been used for a long time;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs212 - fixed Ethernet boot through CRS326 devices;
  • defconf - fixed DISC Lite5 LED default configuration;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • export - fixed "/system routerboard mode-button" compact export;
  • fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • filesystem - improved error correcting process on RB1100AHx4 storage;
  • firewall - fixed "tls-host" firewall feature (introduced in v6.41);
  • flashfig - properly apply configuration provided by Flashfig;
  • gps - added GPS port support for Quectel EC25-E modem when used in LTE mode;
  • gps - improved NMEA sentence handling;
  • health - log warning when switching between redundant power supplies;
  • hotspot - improved HTTPS matching in Walled Garden rules;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • lte - fixed rare situation when r11-LTE interface is missing after reboot;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • poe - hide PoE related properties on interfaces which does not provide power output;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • r11e-lte - improved LTE connection initialization process;
  • romon - make secret field sensitive in console;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • smb - improved NetBIOS name handling and stability;
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added "/interface w60g print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • ssh - remove imported public SSH keys when their owner user is removed;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed occasional reporting of bogus voltage;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
  • tr069-client - fixed HTTPS authentication process;
  • tr069-client - fixed TR069 service becoming unavailable when related service package is not available;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • usb - improved packet processing over USB modems;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed RTS/CTS option for the ARM based wireless devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

MikroTik RouterOS 6.42rc37

Дата выхода: 1 марта 2018

Изменения:

  • bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
  • console - do not allow variables that start with digit to be referenced without $ sign;
  • romon - make secret field sensitive in console;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

Другие изменения относительно 6.41.2:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • export - fixed "/system routerboard mode-button" compact export;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • firewall - fixed "tls-host" firewall feature (introduced v6.41);
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc30

Дата выхода: 20 февраля 2018

Изменения:

  • console - improved console stability after it has not been used for a long time;
  • filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
  • filesystem - improved error correcting process on RB1100AHx4 storage;
  • gps - added GPS port support for Quectel EC25-E modem when used in LTE mode;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - fixed rare situation when r11-LTE interface is missing after reboot;
  • lte - improved IP configuration request process for r11e-LTE-US card;
  • netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
  • tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
  • usb - improved packet processing over USB modems;
  • wireless - improved wireless stability on hAP ac2 devices while USB is being used.

Другие изменения относительно 6.41.2:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • export - fixed "/system routerboard mode-button" compact export;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • firewall - fixed "tls-host" firewall feature (introduced v6.41);
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc28

Дата выхода: 16 февраля 2018

Изменения:

  • chr - added "virtio-scsi" driver on KVM installations;
  • chr - added support for Hyper-V ballooning;
  • chr - added support for Hyper-V guest quiescing;
  • chr - added support for Hyper-V host-guest file transfer;
  • chr - added support for Hyper-V integration services;
  • chr - added support for Hyper-V static IP injection;
  • chr - added support for NIC hot-plug on VMware and Xen installations;
  • chr - fixed additional disk detaching on Xen installations;
  • ipsec - properly detect interface for "mode-config" client IP address assignment;
  • gps - improved NMEA sentence handling;
  • r11e-lte - improved LTE connection initialization process.

Другие изменения относительно 6.41.2:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • export - fixed "/system routerboard mode-button" compact export;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • firewall - fixed "tls-host" firewall feature (introduced v6.41);
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc27

Дата выхода: 14 февраля 2018

Изменения:

  • bridge - fixed false MAC address learning on hAP ac2, cAP ac;
  • bridge - fixed incorrect "fast-forward" enabling when ports were switched;
  • bridge - hide options for disabled bridge features in CLI;
  • capsman - added "allow-signal-out-off-range" option for Access List entries (CLI only);
  • capsman - added support for "interface-list" in Access List entries (CLI only);
  • capsman - added support for "interface-list" in datapath (CLI only);
  • capsman - log "signal-strength" when successfully connected to AP;
  • chr - fixed fresh installations (including ISO images) (introduced in v6.42rc24);
  • kidcontrol - initial work on "/ip kid-control" feature;
  • lte - added initial support for SIM7600 LTE modem interface;
  • smb - improved NetBIOS name handling and stability;
  • snmp - added "/interface w60g print oid";
  • tile - fixed occasional reporting of bogus voltage;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
  • wireless - added initial support for "nstreme-plus";
  • wireless - added support for "band=5ghz-n/ac" (CLI only);
  • wireless - added support for "interface-list" in Access List entries (CLI only);
  • wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces.

Другие изменения относительно 6.41.2:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • export - fixed "/system routerboard mode-button" compact export;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • firewall - fixed "tls-host" firewall feature (introduced v6.41);
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc24

Дата выхода: 8 февраля 2018

Изменения:

  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • export - fixed "/system routerboard mode-button" compact export;
  • firewall - fixed "tls-host" firewall feature (introduced v6.41).

Другие изменения относительно 6.41.1:

  • tile - improved overall system performance and stability ("/system routerboard upgrade" required);
  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • disk - fixed disk related processes becoming unresponsive after unplugging used disk;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed AT communication with modem (introduced in v6.42rc12);
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • ppp - do not lose "/ppp profile" script configuration after other profile parameters are edited;
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • routerboard - properly report warnings under "/system routerboard" menu;
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • userman - added support for ARM and MMIPS platform;
  • w60g - fixed "/interface w60g reset-configuration";
  • webfig - fixed backup loading from Webfig on RouterBOARD running default configuration;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - changed default bridge port PVID value to 1;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - added initial support for "nstreme-plus";
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed wireless protocol mode restrictions if lockapck is installed and has limits for it;
  • wireless - improved compatibility with specific wireless AC standard clients;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc23

Дата выхода: 7 февраля 2018

Изменения:

  • console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38 (CLI only);
  • crs3xx - added initial hw-offload support for 802.3ad and balance-xor bonding
  • disk - fixed disk related processes becoming unresponsive after unplugging used disk;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • ppp - do not lose "/ppp profile" script configuration after other profile parameters are edited;
  • routerboard - properly report warnings under "/system routerboard" menu;
  • sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
  • snmp - added w60g support;
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • w60g - fixed "/interface w60g reset-configuration";
  • winbox - changed default bridge port PVID value to 1;
  • wireless - added initial support for "nstreme-plus";
  • wireless - improved compatibility with specific wireless AC standard clients.

Другие изменения относительно 6.41.1:

  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed AT communication with modem (introduced in v6.42rc12);
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - fixed SNMP for w60g interfaces;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • webfig - fixed backup loading from Webfig on RouterBOARD running default configuration;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed wireless protocol mode restrictions if lockapck is installed and has limits for it;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc20

Дата выхода: 2 февраля 2018

Изменения:

  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16.

Другие изменения относительно 6.41.1:

  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - added switch port "storm-rate" limiting options;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed AT communication with modem (introduced in v6.42rc12);
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - fixed SNMP for w60g interfaces;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • webfig - fixed backup loading from Webfig on RouterBOARD running default configuration;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to comment new object without committing it;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - fixed wireless protocol mode restrictions if lockapck is installed and has limits for it;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc18

Дата выхода: 2 февраля 2018

Изменения:

  • bridge - show "hw" flags only on Ethernet interfaces and interface lists;
  • crs3xx - added switch port "storm-rate" limiting options;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • lte - fixed AT communication with modem (introduced in v6.42rc12);
  • switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
  • webfig - fixed backup loading from Webfig on RouterBOARD running default configuration;
  • winbox - allow to comment new object without committing it;
  • wireless - fixed incompatibility with macOS clients;
  • wireless - fixed wireless protocol mode restrictions if lock package is installed and has limits for it.

Другие изменения относительно 6.41.1:

  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new system ID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - fixed SNMP for w60g interfaces;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • userman - added support for ARM and MMIPS platform;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to open bridge host entry;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc15

Дата выхода: 26 января 2018

Изменения:

  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6 - make sure that time is set before restoring bindings;
  • dhcpv6-client - added possibility to specify options;
  • dhcpv6-server - added DHCPv4 style user options;
  • fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
  • ippool - added ability to specify comment;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
  • sfp - improved SFP module compatibility;
  • userman - added support for ARM and MMIPS platform;
  • webfig - do not show "hw" option on non-ethernet interfaces;
  • winbox - added "crl-store" setting to certficate settings;
  • winbox - fixed typo from "UPtime" to "Uptime";
  • winbox - fixed Winbox closing when viewing graph which does not contain any data.

Другие изменения относительно 6.41:

  • bridge - fixed "mst-override" export;
  • bridge - fixed allowed MSTI priority values;
  • bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
  • bridge - fixed hw-offload disabling when adding a port with "horizon" set;
  • bridge - fixed IGMP Snooping after disabling/enabling bridge;
  • bridge - fixed interface list moving in "/interface bridge port" menu;
  • bridge - fixed repetitive port "priority" set;
  • bridge - fixed situation when packet could be sent with local MAC as dst-mac;
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - do not use utf8 for SCEP challange password;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new systemID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • crs326 - fixed possible packet leaking from CPU to switch ports;
  • crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv4-server - fixed framed and classless route received from RADIUS server;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options (CLI only);
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options (CLI only);
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
  • ike2 - delay rekeyed peer outbound SA installation;
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment (CLI only);
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • log - properly report bridge interface MAC address changes;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • ppp - changed default value of "route-distance" to 1;
  • ppp - fixed change-mss functionality in some specific traffic (introduced in v6.41);
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • radius - increase allowed RADIUS server timeout to 60s;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - allow also IPv6 on default public community;
  • snmp - fixed SNMP for w60g interfaces;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • webfig - added support for proper default policies when adding script or scheduler job;
  • webfig - fixed bridge port sorting order by name;
  • webfig - fixed MAC address ordering;
  • webfig - fixed wireless snooper address, SSID and other column ordering;
  • winbox - added "dhcp-option-set" to DHCP server;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to open bridge host entry;
  • winbox - allow to specify "to-ports" for "action=masquerade";
  • winbox - do not show "hw" option on non-ethernet interfaces;
  • winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - updated "Czech Republic" country 5.8 GHz frequency range.

MikroTik RouterOS 6.42rc14

Дата выхода: 24 января 2018

Изменения:

  • bridge - fixed ARP option changing on bridge (introduced v6.41);
  • bridge - fixed VLAN filtering when "use-ip-firewall" is enabled (introduced in v6.41);
  • certificate - added PKCS#10 version check;
  • certificate - dropped DES support and added AES instead for SCEP;
  • certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
  • certificate - fixed PKCS#10 version;
  • netinstall - improved LTE package description;
  • ovpn - fixed resource leak on systems with high CPU usage;
  • ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
  • rb433/rb450 - fixed port flapping on bridged Ethernet interfaces if hw-offload is enabled (introduced in v6.41);
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required) (CLI only);
  • userman - added support for ARM and MMIPS platforms;
  • wireless - improved packet processing on ARM platform devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

Другие изменения относительно 6.41:

  • bridge - fixed "mst-override" export;
  • bridge - fixed allowed MSTI priority values;
  • bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
  • bridge - fixed hw-offload disabling when adding a port with "horizon" set;
  • bridge - fixed IGMP Snooping after disabling/enabling bridge;
  • bridge - fixed interface list moving in "/interface bridge port" menu;
  • bridge - fixed repetitive port "priority" set;
  • bridge - fixed situation when packet could be sent with local MAC as dst-mac;
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - do not use utf8 for SCEP challange password;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new systemID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • crs326 - fixed possible packet leaking from CPU to switch ports;
  • crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv4-server - fixed framed and classless route received from RADIUS server;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options (CLI only);
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • dhcpv6-server - added DHCPv4 style user options (CLI only);
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
  • ike2 - delay rekeyed peer outbound SA installation;
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment (CLI only);
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • log - properly report bridge interface MAC address changes;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • ppp - changed default value of "route-distance" to 1;
  • ppp - fixed change-mss functionality in some specific traffic (introduced in v6.41);
  • quickset - properly detect LTE interface on startup;
  • quickset - show "G" flag for guest users;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • radius - increase allowed RADIUS server timeout to 60s;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • snmp - added "/caps-man interface print oid";
  • snmp - added w60g support;
  • snmp - allow also IPv6 on default public community;
  • snmp - fixed SNMP for w60g interfaces;
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • webfig - added support for proper default policies when adding script or scheduler job;
  • webfig - fixed bridge port sorting order by name;
  • webfig - fixed MAC address ordering;
  • webfig - fixed wireless snooper address, SSID and other column ordering;
  • winbox - added "dhcp-option-set" to DHCP server;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to open bridge host entry;
  • winbox - allow to specify "to-ports" for "action=masquerade";
  • winbox - do not show "hw" option on non-ethernet interfaces;
  • winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - updated "Czech Republic" country 5.8 GHz frequency range.

MikroTik RouterOS 6.42rc12

Дата выхода: 22 января 2018

Изменения:

  • bridge - fixed "mst-override" export;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • dhcpv6-server - added DHCPv4 style user options (CLI only);
  • interface - improved interface configuration responsiveness;
  • ippool - added ability to specify comment (CLI only);
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • ppp - fixed change-mss functionality in some specific traffic (introduced in v6.41);
  • quickset - properly detect LTE interface on startup;
  • routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required) (CLI only);
  • snmp - added "/caps-man interface print oid";
  • snmp - improved request processing performance for wireless and CAP interfaces;
  • wireless - fixed "wds-slave" channel selection when single frequency is specified.

Другие изменения относительно 6.41:

  • bridge - fixed allowed MSTI priority values;
  • bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
  • bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
  • bridge - fixed hw-offload disabling when adding a port with "horizon" set;
  • bridge - fixed IGMP Snooping after disabling/enabling bridge;
  • bridge - fixed interface list moving in "/interface bridge port" menu;
  • bridge - fixed repetitive port "priority" set;
  • bridge - fixed situation when packet could be sent with local MAC as dst-mac;
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • certificate - do not use utf8 for SCEP challange password;
  • chr - automatically generate new systemID on first startup;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • crs326 - fixed possible packet leaking from CPU to switch ports;
  • crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv4-server - fixed framed and classless route received from RADIUS server;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options (CLI only);
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-client - implement confirm after reboot;
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
  • ike2 - delay rekeyed peer outbound SA installation;
  • ike2 - improve half-open connection handling;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
  • log - properly report bridge interface MAC address changes;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • ppp - changed default value of "route-distance" to 1;
  • quickset - show "G" flag for guest users;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • radius - increase allowed RADIUS server timeout to 60s;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • snmp - added w60g support;
  • snmp - allow also IPv6 on default public community;
  • snmp - fixed SNMP for w60g interfaces;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • webfig - added support for proper default policies when adding script or scheduler job;
  • webfig - fixed bridge port sorting order by name;
  • webfig - fixed MAC address ordering;
  • webfig - fixed wireless snooper address, SSID and other column ordering;
  • winbox - added "dhcp-option-set" to DHCP server;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - added possibility to delete SMS from inbox;
  • winbox - allow to open bridge host entry;
  • winbox - allow to specify "to-ports" for "action=masquerade";
  • winbox - do not show "hw" option on non-ethernet interfaces;
  • winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
  • winbox - fixed "/tool e-mail send" attachment behavior;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces;
  • wireless - updated "Czech Republic" country 5.8 GHz frequency range.

MikroTik RouterOS 6.42rc11

Дата выхода: 18 января 2018

Изменения:

  • bridge - fixed IGMP Snooping after disabling/enabling bridge;
  • bridge - fixed allowed MSTI priority values;
  • certificate - do not use utf8 for SCEP challenge password;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - automatically generate new systemID on first startup;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs326 - fixed possible packet leaking from CPU to switch ports;
  • dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
  • dhcpv6-client - implement confirm after reboot;
  • filesystem - fixed situations when "/flash" directory lost files after upgrade;
  • ipsec - fixed AES-CTR and AES-GCM support on RB1200;
  • kidcontrol - added initial support for "/ip kid-control" feature;
  • ppp - changed default value of "route-distance" to 1;
  • ppp - fixed change-mss funcionality in some specific traffic (introduced in v6.41);
  • webfig - fixed MAC address ordering;
  • webfig - fixed wireless snooper address, SSID and other column ordering;
  • winbox - added "dhcp-option-set" to DHCP server;
  • winbox - added "insert-queue-before" to DHCP server;
  • winbox - added DHCPv6 client info request type and updated statuses;
  • winbox - show Bridge Port PVID column by default;
  • wireless - fixed nv2 (introduced in v6.42rc).

Другие изменения относительно 6.41:

  • bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
  • bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
  • bridge - fixed hw-offload disabling when adding a port with "horizon" set;
  • bridge - fixed interface list moving in "/interface bridge port" menu;
  • bridge - fixed repetitive port "priority" set;
  • bridge - fixed situation when packet could be sent with local MAC as dst-mac;
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv4-server - fixed framed and classless route received from RADIUS server;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added possibility to specify options (CLI only);
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-server - added DHCPv4 style user options;
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
  • ike2 - delay rekeyed peer outbound SA installation;
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
  • log - properly report bridge interface MAC address changes;
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • quickset - show "G" flag for guest users;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • radius - increase allowed RADIUS server timeout to 60s;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • snmp - added w60g support;
  • snmp - allow also IPv6 on default public community;
  • snmp - fixed SNMP for W60G interfaces;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • webfig - added support for proper default policies when adding script or scheduler job;
  • webfig - fixed bridge port sorting order by name;
  • winbox - added possibility to delete SMS from Inbox;
  • winbox - allow to open bridge host entry;
  • winbox - allow to specify "to-ports" for "action=masquerade";
  • winbox - do not show "hw" option on non-ethernet interfaces;
  • winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
  • winbox - fixed "/tool e-mail send" attachment behaviour;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces;
  • wireless - updated "Czech Republic" country 5.8 GHz frequency range.

MikroTik RouterOS 6.42rc9

Дата выхода: 15 января 2018

Изменения:

  • bridge - fixed interface list moving in "/interface bridge port" menu;
  • bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
  • bridge - fixed hw-offload disabling when adding a port with "horizon" set;
  • bridge - fixed repetitive port "priority" set;
  • bridge - fixed situation when packet could be sent with local MAC as dst-mac;
  • chr - added "open-vm-tools" on VMware installations;
  • chr - added "qemu-guest-agent" on KVM installations;
  • chr - added "xe-daemon" on Xen installations;
  • chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
  • chr - fixed suspend on Xen installations;
  • chr - make additional disks visible under "/disk" on Xen installations;
  • chr - make virtio disks visible under "/disk" on KVM installations;
  • crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
  • crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
  • dhcpv4-server - fixed framed and classless route received from RADIUS server;
  • dhcpv6-client - added info exchange support;
  • dhcpv6-client - added support for options 15 and 16;
  • dhcpv6-server - added DHCPv4 style user options;
  • ike1 - do not accept "mode-config" reply more than once;
  • ike2 - delay rekeyed peer outbound SA installation;
  • ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
  • kidcontrol - added initial support for "/ip kid-control" feature (CLI only);
  • lte - do not add DHCP client on LTE modems that doesn't use DHCP;
  • lte - fixed DHCP client adding for MF823 modem;
  • mac-ping - fixed duplicate responses;
  • modem - added initial support for AC340U;
  • ppp - allow to override remote user PPP profile via "Mikrotik-Group";
  • ppp - changed default value of "route-distance" to 1;
  • quickset - show "G" flag for guest users;
  • radius - added warning if PPP authentication over RADIUS is enabled;
  • radius - increase allowed RADIUS server timeout to 60s;
  • snmp - allow also IPv6 on default public community;
  • snmp - fixed SNMP for W60G interfaces;
  • tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
  • tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
  • webfig - added support for proper default policies when adding script or scheduler job;
  • webfig - fixed bridge port sorting order by name;
  • winbox - added possibility to delete SMS from Inbox;
  • winbox - allow to open bridge host entry;
  • winbox - allow to specify "to-ports" for "action=masquerade";
  • winbox - do not show "hw" option on non-ethernet interfaces;
  • winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
  • winbox - fixed "/tool e-mail send" attachment behaviour;
  • winbox - improved stability when using trackpad scrolling in large lists;
  • wireless - fixed frequency-monitor/sniffer/snooper; (introduced in v6.42rc);
  • wireless - fixed nv2 (introduced in v6.42rc);
  • wireless - updated "Czech Republic" country 5.8 GHz frequency range.

Другие изменения относительно 6.41:

  • bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • dhcpv6-client - added possibility to specify options (CLI only);
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • log - properly report bridge interface MAC address changes;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • snmp - added w60g support;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc6

Дата выхода: 4 января 2018

Изменения:

  • btest - fixed TCP test accuracy when low TX/RX rates are used;
  • crs317 - improved transmit performance between 10G and 1G ports;
  • dhcpv6-client - added possibility to specify options (CLI only);
  • snmp - added w60g support;
  • wireless - fixed device becoming unresponsive (introduced in v6.42rc5).

Другие изменения относительно 6.41:

  • bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • dude - fixed e-mail notifications when default port is not used;
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - fixed “aes-ctr” and “aes-gcm” encryption algorithms (introduced v6.41);
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • log - properly report bridge interface MAC address changes;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tile - fixed USB device speed detection after reboot;
  • tr069-client - fixed HTTPS authentication process;
  • traffic-flow - do not count single extra packet per each flow;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

MikroTik RouterOS 6.42rc5

Дата выхода: 3 января 2018

Изменения:

  • bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
  • bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
  • capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
  • detnet - additional work on "detect-internet" implementation;
  • detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
  • discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
  • firewall - fixed "tls-host" firewall matcher (introduced v6.41);
  • ike1 - display error message when peer requests "mode-config" when it is not configured;
  • ike1 - fixed “aes-ctr” and “aes-gcm” encryption algorithms (introduced v6.41);
  • ike2 - improve half-open connection handling;
  • interface - improved interface configuration responsiveness;
  • log - properly report bridge interface MAC address changes;
  • poe-out - do not show "poe-out-current" on devices which can not determine it;
  • rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
  • ssh - improved key import error messages;
  • tile - added "aes-ctr" hardware acceleration support;
  • tr069-client - fixed HTTPS authentication process;
  • wireless - fixed nv2 protocol on ARM platform SXTsq devices;
  • wireless - improved wireless scan functionality for devices with multiple wireless interfaces.

Другие изменения относительно 6.41:

  • dude - fixed e-mail notifications when default port is not used;
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • tile - fixed USB device speed detection after reboot;
  • traffic-flow - do not count single extra packet per each flow.

MikroTik RouterOS 6.42rc2

Дата выхода: 27 декабря 2017

Изменения:

  • dude - fixed e-mail notifications when default port is not used;
  • firewall - fixed "tls-host" firewall matcher;
  • firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
  • routerboot - fixed missing upgrade firmware for "ar7240" devices;
  • tile - fixed USB device speed detection after reboot;
  • traffic-flow - do not count single extra packet per each flow.
Чек-лист по настройке MikroTik
Проверьте свою конфигурацию по 28-ми пунктам