MikroTik RouterOS 6.39.x
Подробное описание изменений в MikroTik RouterOS 6.39.x. Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 27 апреля 2017, дата выхода последнего набора изменений – 12 октября 2017.
Полезные материалы по MikroTik
Секреты настройки MikroTik
Более 18.000 подписчиков самого большого telegram-канала «MikroTik-сэнсэй» первыми узнают секреты настройки MikroTik от автора этой статьи.
MikroTik RouterOS 6.39.3 Long term
Дата выхода: 12 октября 2017
Изменения:
- arp - properly update dynamic ARP entries after interface related changes;
- bonding - fixed 802.3ad mode on RB1100AHx4;
- bonding - improved reliability on bonding interface removal;
- console - fixed different command auto complete;
- crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules;
- crs317 - added L2MTU support;
- crs3xx - improved packet processing in slowpath;
- dhcp - fixed downgrade from RouterOS v6.41 or higher;
- dhcpv4-server - fixed lease renew for DHCP clients that sends renewal with "ciaddr = 0.0.0.0";
- dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
- dhcpv6-client - fixed IA evaluation order;
- dhcpv6-client - require pool name to be unique;
- dhcpv6-server - do not release address of static binding from pool after server removal;
- discovery - fixed timeouts for LLDP neighbours;
- ethernet - fixed occasional broken interface order after reset/first boot;
- ethernet - fixed rare linking problem with forced 10Mbps full-duplex mode;
- export - fixed export for PoE-OUT related settings;
- export - fixed wireless "ssid" and "supplicant-identity" compact export;
- fasttrack - fixed fasttrack over interfaces with dynamic MAC address;
- firewall - fixed bridge "action=log" rules;
- firewall - fixed crash on fasttrack dummy rule manual change attempt;
- firewall - properly remove "address-list" entry after timeout ends;
- firewall - removed unique address list name limit;
- hAP ac lite - removed nonexistent "wlan-led";
- hotspot - improved user statistics collection process;
- hotspot - require "dns-name" to contain "." symbol under Hotspot Server Profile configuration;
- ike1 - fixed initiator ID comparison to NAT-OA;
- interface - improved interface state change handling when multiple interfaces are affected at the same time;
- ipsec - do not deduct "dst-address" from "sa-dst-address" for "/0" policies;
- ipv6 - fixed IPv6 address request from pool;
- metarouter - fixed display of bogus error message on startup;
- ntp-client - properly start NTP client after reboot if manual server IP is not configured;
- ovpn - added support for "push-continuation";
- ovpn - added support for topology subnet for IP mode;
- ovpn - fixed duplicate default gateway presence when receiving extra routes;
- ovpn - improved performance when receiving too many options;
- ping - fixed ping getting stuck (after several thousands of ping attempts);
- ppp - fixed non-standart PAP or CHAP packet handling;
- pppoe-client - fixed incorrectly formed PADT packet;
- pppoe-client - fixed wrong MRU detection over VLAN interfaces;
- proxy - fixed rare program crash after closing client connection;
- quickset - fixed incorrect VPN address value on arm and tilera;
- rb1100ahx4 - fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes;
- rb1100ahx4 - fixed startup problems (requires additional reboot after upgrade);
- rb2011 - fixed possible LCD blinking along with ethernet LED;
- rb3011 - fixed packet passthrough on switch2 while booting;
- rb922 - restored missing wireless interface on some boards;
- safe-mode - fixed session handling when Safe Mode is used on multiple sessions at the same time;
- sfp - fixed invalid temperature readings when ambient temperature is below 0C;
- sfp - fixed OPTON module DDM information readings;
- sfp - fixed temperature readings for various SFP modules;
- sniffer - do not skip L2 packets when "all" interface mode was used;
- snmp - fixed "/caps-man registration-table" uptime values;
- snmp - fixed "/system license" parameters for CHR;
- snmp - fixed "/system resource cpu print oid";
- snmp - fixed crash on interface table get;
- ssh - do not execute command if it starts with "-" symbol;
- supout - fixed IPv6 firewall section;
- switch - fixed multicast forwarding on CRS326;
- tile - fixed copying large amount of text over serial console;
- tile - improved reliability on MPLS package processing;
- traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package;
- trafficgen - fixed "lost-ratio" showing incorrect statistics after multiple sequences;
- userman - do not send disconnect request for user when "simultaneous session limit reached";
- userman - fixed "limitation" and "profile-limitation" update;
- userman - fixed CoA packet processing after changes in "/tool user-manager router" configuration;
- userman - lookup language files also in "/flash" directory;
- vlan - do not allow VLAN MTU to be higher than L2MTU;
- vlan - do not delete existing VLAN interface on "failure: already have such vlan";
- webfig - allow to unset "rate-limit" for DHCP leases;
- webfig - fixed wireless "scan-list" parameter not being saved after applying changes;
- webfig - improved reliability of login process;
- winbox - added possibility to define "comment" for "/routing bgp network" entries;
- winbox - added support for certificate CRL list;
- winbox - do not show LCD menu for devices which does not have it;
- winbox - fixed ARP table update after entry changes state to incomplete;
- winbox - hide "level" and "tunnel" parameters for IPSec policy templates;
- winbox - hide FAN speed if it is 0RPM;
- winbox - make IPSec policies table an ordered list;
- winbox - properly show "dhcp-server" warnings;
- winbox - show "/interface wireless cap print" warnings;
- winbox - show "/system health" only on boards that have health monitoring;
- winbox - show "D" flag under "/interface mesh port" menu;
- wireless - added "etsi1" and "russia3" regulatory domain information;
- wireless - fixed compatibility with "AR5212" wireless chips;
- wireless - improved WPA2 key exchange reliability;
- wireless - updated "china", "norway" and "new-zealand" regulatory domain information.
MikroTik RouterOS 6.39.2 Stable
Дата выхода: 6 июня 2017
Изменения:
- 6to4 - fixed wrong IPv6 "link-local" address generation;
- arp - fixed "make-static";
- bonding - do not add bonding interface if "could not set MTU" error is received;
- bridge - fixed connectivity between bridges when "fast-forward" feature is enabled;
- conntrack - load IPv6 connection tracking independently from IPv4;
- console - fixed "No such file or directory" warnings on upgrade reboots;
- export - removed spare "caller-id-type" value from compact export;
- fetch - fixed "user" and "password" argument parsing from URL for FTP;
- firewall - fixed "address-list" entry "creation-time" adjustment to timezone;
- firewall - do not allow to set "rate" value to 0 for "limit" parameter;
- firewall - fixed "address-list" entry changing from IP to DNS and vice versa;
- gps - removed duplicate logs;
- ike1 - fixed crash on xauth message;
- ike1 - removed xauth login length limitation;
- ike2 - fixed rare kernel failure on address acquire;
- ike2 - fixed situation when traffic selector prefix was parsed incorrectly;
- ipsec - fixed generated policy priority;
- ipsec - fixed peer "my-id" address reset;
- ipsec - renamed "remote-dynamic-address" to "dynamic-address";
- ipv6 - fixed address becoming invalid when interface was removed from bridge/mesh;
- led - fixed turning off LED when interface is lost;
- lte - improved info channel background polling;
- lte - improved relialibility on SXT LTE;
- lte - replaced "user-command" with "at-chat" command;
- ppp - fixed "change-mss" functionality (introduced in 6.39);
- ppp - fixed MLPPP over multiple channels/interfaces (introduced in v6.39);
- ppp - send correct IP address in RADIUS "accounting-stop" messages (introduced in 6.39);
- pppoe - fixed warning on PPPoE server, when changing interface to non-slave interface;
- pppoe-client - removed false warning from client interface if it starts running on non-slave interface;
- pppoe-server - fixed "one-session-per-host" issue where 2 simultaneous sessions were possible from the same host;
- queue - fixed queuing when at least one child queue has "default-small" and other/s is/are different (introduced in 6.35);
- quickset - fixed LTE "signal-strength" graphs;
- sniffer - fixed VLAN tags when sniffing all interfaces;
- snmp - fixed limited walk;
- switch - fixed disabling of MAC learning on CRS1xx/CRS2xx;
- tile - fixed EoIP keepalive when tunnel is made over VLAN interface;
- tile - fixed rare encryption kernel failure when small packets are processed;
- traffic-flow - fixed IPFIX IPv6 data reporting;
- winbox - do not allow to open multiple same sub-menus at the same time;
- winbox - fixed firewall port selection with Winbox v2;
- winbox - fixed LTE info button;
- winbox - removed spare values from "loop-protect" setting for EoIPv6 tunnels;
- wireless - reduced load on CPU for high speed wireless links.
MikroTik RouterOS 6.39.1 Stable
Дата выхода: 27 апреля 2017
Изменения:
- defconf - discard default configuration startup query with RouterOS upgrade;
- defconf - discard default configuration startup query with configuration change from Webfig;
- smb - fixed external drive folder sharing when "/flash" folder existed;
- smb - fixed invalid default share after reboot when "/flash" folder existed;
- upnp - fixed firewall nat rule update when external IP address changes;
- dns - made loading thousands of static entries faster.
MikroTik RouterOS in 6.39 Stable
Дата выхода: 27 апреля 2017
Важные изменения:
- bridge - added "fast-forward" setting and counters (enabled by default only for new bridges) (CLI only);
- bridge - added support for special and faster case of fastpath called "fast-forward" (available only on bridges with 2 interfaces);
- bridge - reverted bridge BPDU processing back to pre-v6.38 behaviour; (v6.40 will have another separate VLAN-aware bridge implementation);
- filesystem - fixed rare situation when filesystem failed to read all configuration on startup;
- filesystem - fixed rare situation when filesystem went into read-only mode (some configuration might have gotten lost on reboot);
- firewall - discontinued support for p2p matcher (old rules will become invalid);
- kernel - fixed UDP checksum handling in rare oveflow situations;
- l2tp - added fastpath support when MRRU is enabled;
- ppp - completely rewritten internal fragmentation algorithm (when MRRU is used), optimized for multicore;
- ppp - implemented internal algorithm for "change-mss", no mangle rules necessary;
- pppoe - added fastpath support when MRRU and MLPPP are enabled;
- quickset - configuration changes are now applied only on "OK" and "Apply" (not on mode change);
- tile - fixed IPSec hardware acceleration out-of-order packet problem, significantly improved performance;
- winbox - minimal required version is v3.11.
Изменения:
- address - fixed crash when address is assigned to another bridge port;
- api - fixed double dynamic flags for "/ip firewall address-list print";
- capsman - added "extension-channel" XX and XXXX auto matching modes;
- capsman - added "keepalive-frames" setting;
- capsman - added "skip-dfs-channels" setting;
- capsman - added CAP discovery interface list support;
- capsman - added DFS support;
- capsman - added EAP identity to registration table;
- capsman - added ability to specify multiple channels in frequency field;
- capsman - added save-channel option to speed up frequency selection on CAPsMAN restart;
- capsman - added support for "background-scan" and channel "reselect-interval";
- capsman - added support for static virtual interfaces on CAP;
- capsman - changed channel "width" name to "control-channel-width" and changed default values;
- capsman - improved CAP status querying;
- capsman - improved support for communicating frame priority between CAP and CAPsMAN;
- certificate - SCEP client now supports FQDN URL and port;
- certificate - allow CRL address to be specified as DNS name;
- console - fixed "/ip neighbor discovery" export;
- console - fixed DHCP/PPP add-default-route distance minimal value to 1;
- console - fixed crash;
- console - fixed incorrect ":put [/lcd get enabled]" value;
- ddns - improved "dns-update" authentication validation;
- defconf - fixed Groove 52 ac band settings;
- defconf - fixed default configuration generation when wireless package is disabled;
- dhcp-client - added "script" option which executes script on state changes;
- dhcpv4 - fixed string option parser;
- dhcpv4-server - added "lease-hostname" script parameter;
- dhcpv4-server - by default make server authoritative;
- dhcpv4-server - do some lease checks only on enabled object;
- discovery - fixed LLDP discovery, IPv6 address was not parsed correctly;
- dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=21&t=116471);
- email - check for errors during SMTP exchange process;
- ethernet - added "voltage-too-low" status for single port power injector devices;
- ethernet - fixed "loop-protect" on "master-port";
- ethernet - fixed rare switch chip hang (could cause port flapping);
- ethernet - fixed unnecessary power cycle of powered device when changing any poe-out related setting on single port power injector devices;
- ethernet - renamed "rx-lose" to "rx-loss" in ethernet statistics;
- ethernet - reversed poe-priority on hEX PoE and OmniTIK 5 PoE to make "poe-priority" consistent to all other RouterOS priorities;
- fastpath - fixed rare crash on devices with dynamic interfaces;
- fetch - added "http-data" and "http-method" parameters to allow delete, get, post, put methods (content-type=application/x-www-form-urlencoded by default);
- fetch - fixed authentication failure;
- fetch - fixed download issue over HTTPS;
- gps - added "fix-quality" and "horizontal-dilution" parameters;
- graphing - fixed graph disappearance after power outage;
- hotspot - added access to HTTP headers using $(http-header-name);
- ike1 - fixed ph2 ID logging;
- ike2 - allow multiple child SA traffic selectors on re-key;
- ike2 - always replace empty TSi with configured address if it is available;
- ike2 - check child state before allowing rekey;
- ike2 - default to /32 peer address mask;
- ike2 - fixed CTR mode;
- ike2 - fixed EAP message length;
- ike2 - fixed ISA handler object removal on SA delete;
- ike2 - fixed RSA authentication without EAP;
- ike2 - fixed ctr mode;
- ike2 - fixed disabled DPD;
- ike2 - fixed last EAP auth payload type;
- ike2 - fixed ph2 state when sending notify;
- ike2 - fixed policy release during SA negotion;
- ike2 - fixed state when sending delete packet;
- ike2 - improved logging;
- ike2 - kill only child SAs which are not re-keyed by remote peer;
- ike2 - log RADIUS timeout message under error topic;
- ike2 - remove old SA after rekey;
- ike2 - send EAP identity as user-name RADIUS attribute;
- ike2 - update "calling_station_id" RADIUS attribute;
- ike2 - update peer identity after successful EAP authentication;
- ippool - return proper error message when trying to create duplicate name;
- ipsec - added "last-seen" parameter to active connection list;
- ipsec - allow mixing aead algorithms in proposal;
- ipsec - better responder flag calculator for console;
- ipsec - disallow AH+ESP combined policies ;
- ipsec - do not loose "use-ipsec=yes" parameter after downgrade;
- ipsec - enable aes-ni on i386 and x64 for cbc, ctr and gcm modes;
- ipsec - fixed "/ip ipsec policy group export verbose";
- ipsec - fixed "mode-cfg" verbose export;
- ipsec - fixed SA authentication flag;
- ipsec - renamed "hw-authenc" flag to "hw-aead";
- ipsec - show hardware accelerated authenticated SAs;
- ipsec - updated tilera classifier for UDP encapsulated ESP;
- l2tp - added support for multiple L2TP tunnels (not to be confused with sessions) between same endpoints (required in some LNS configurations);
- l2tp - fixed hidden attribute decryption in forwarded CHAP responses for LNS;
- l2tp-server - added "caller-id-type" to forward calling station number to RADIUS on authentication;
- l2tp-server - added "use-ipsec=required" option;
- l2tp-server - fixed upgrade to keep "use-ipsec=yes" in L2TP server;
- leds - added LTE modem access technology trigger;
- leds - changed error message on unsupported board;
- leds - do not update single LED state when it is not changed;
- leds - show warning on print when "modem-signal-threshold" is not available;
- log - added "gps" topic;
- log - added "tr069" topic;
- log - added missing "license limit exceeded" log entry;
- log - added warning when Winbox/Dude sessions were denied;
- log - do not show changes in packet if NAT has not been used;
- log - make SNMP logs more compact;
- lte - added "session-uptime" in info command;
- lte - added LTE signal level reading for Cinterion modems;
- lte - added error handling for remote AT execute;
- lte - added initial support for DWR-910 modem;
- lte - added initial support for Quectel ec25;
- lte - added initialization for Cinterion;
- lte - added log entry for SMS delivery report;
- lte - added support for Vodafone R216 (Huawei);
- lte - buffer AT events while info command is active;
- lte - fixed "/interface lte info X once";
- lte - fixed IPv6 address prefix on interface
- lte - fixed network mode selection for me909u, mu609;
- lte - fixed older standard CEREG parsing;
- lte - fixed support for Huawai R216;
- lte - fixed user-command;
- lte - reset interface stats on "link-down";
- netinstall - fixed typos;
- ntp - restart NTP client when it is stuck in error state;
- ppp - added "bridge-horizon" option under PPP/Profile;
- ppp - added option to specify "interface-list" in PPP/Profile;
- ppp - fixed rare kernel failure on PPP client connection;
- ppp - fixed rare kernel failure when receiving IPv6 address on PPP interface;
- ppp - include rates, limits and address-lists parameters in RADIUS accounting requests;
- ppp-client - added support for Datacard 750UL, DWR-730 and K4607-Zr;
- pppoe - added warning on PPPoE client/server, if it is configured on slave interface;
- pppoe - set default keepalive 10s for newly created PPPoE clients;
- quickset - added initial LTE AP mode support;
- rb1100ahx2 - fixed random counter resets for ether12,13;
- rb3011 - added partitioning support;
- smb - fixed different memory leaks and crashes;
- smb - fixed share path on devices with "/flash" directory;
- smips - reduced RouterOS main package size;
- snmp - "No Such Instance" error message is replaced with "No Such Object";
- snmp - added fan-speed OIDs in "/system health print oid";
- snmp - added optical table;
- snmp - fixed rare crash;
- snmp - improved getall filter;
- snmp - improved response speed when multiple requests are received within short period of time;
- snmp - increase "engineBoots" value on reboot;
- snmp - optimized bridge table processing;
- tile - added initial support for NVMe SSD disk drives;
- tile - fixed IPSec crash (introduced in 6.39rc64);
- tile - optimized hardware encryption;
- tr069-client - added "Device.Hosts.Host.{i}." support;
- tr069-client - added "Device.WiFi.NeighboringWiFiDiagnostic." support;
- tr069-client - added "Ethernet.Interface.{i}.MACAddress" parameter;
- tr069-client - added DHCP server support;
- tr069-client - added Upload RPC "2 Vendor Log File" support;
- tr069-client - added architecture name parameter (X_MIKROTIK_ArchName - vendor specific);
- tr069-client - added basic stats parameters for some interface types;
- tr069-client - added basic support for "/ip firewall filters";
- tr069-client - added connection request authentication;
- tr069-client - added firewall NAT support using vendor Parameters;
- tr069-client - added parameters for DNS client management support;
- tr069-client - added ping diagnostics support;
- tr069-client - added support for escaped entity references (& < > ' ");
- tr069-client - added support for managing "/system/identity/" value;
- tr069-client - added support for memory and CPU load parameters;
- tr069-client - added support for uploading/downloading factory script;
- tr069-client - added traceroute diagnostics support;
- tr069-client - close connection if CPE considers XML as invalid;
- tr069-client - fixed "AddObjectResponse" "InstanceNumber" value;
- tr069-client - fixed "Device.ManagementServer." value update;
- tr069-client - fixed XML special character parsing;
- tr069-client - fixed crash on =acs-url change special case;
- tr069-client - fixed special escape characters on XML data send;
- tr069-client - fixed write for "Device.ManagementServer.URL";
- tr069-client - general improvements on reducing storage space;
- tr069-client - generate random connection request target path;
- tr069-client - hide "Device.PPP.Interface.{i}.Password" value;
- tr069-client - improved LTE monitoring process;
- tr069-client - increased performance on GetParameterValues;
- tr069-client - made any Download RPC overwrite configuration except ".alter";
- tr069-client - make more Parameters deny active notifications;
- tr069-client - set CHR license ID as ".SerialNumber" value to avoid "no serial number" error in ACS;
- traceroute - small fix;
- tunnels - fixed reboot loop on configurations with IPIP and EoIP tunnels (introduced in 6.39rc68);
- usb - added support for more CP210X devices;
- userman - allow "name-for-user" to be empty and not unique;
- userman - automatically select all newly created users to generate vouchers;
- userman - fixed rare crash when User Manager requested file does not exist on router;
- userman - fixed rare web interface crash while using Users section;
- wAP ac - improved 2.4GHz wireless performance;
- webfig - added menu bar to quickly select between Webfig, Quickset and Terminal;
- webfig - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- webfig - allow to change global variable contents;
- webfig - allow to enter frequency ranges in wireless scan list;
- webfig - allow to select "default-encryption" profile on PPP tunnels;
- webfig - correctly specify routing filter prefix;
- webfig - do not allow to reorder items if table is sorted by some column;
- webfig - fixed bridge property display;
- webfig - fixed delays on key press in terminal;
- webfig - fixed tab ordering on Google Chrome;
- webfig - fixed last-link-up & last-link-down time information;
- webfig - improved field layout;
- webfig - make Terminal window work within Webfig window;
- webfig - show all available options under Advanced Mode for wireless interfaces;
- webfig - show proper error messages for optional erroneous text fields;
- winbox - added "Flush" button under unicast-fdb menu;
- winbox - added "group-key-update" to CAPsMAN security settings;
- winbox - added "k" and "M" unit support to PPP secret limit-bytes parameters;
- winbox - added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" parameters;
- winbox - added "save-selected" setting under CAPsMAN channels;
- winbox - added "static-virtual" to wireless CAP;
- winbox - added GPS menu;
- winbox - added protected routerboard parameters under routerboard settings menu;
- winbox - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- winbox - allow to change user password to empty one;
- winbox - allow to not specify certificate in IPSec peer settings;
- winbox - allow to specify "route-distance" in "dhcp-client" if "special-classless" mode is selected;
- winbox - allow to specify certificate type when exporting it;
- winbox - allow to specify interfaces that CAPsMAN can use for management;
- winbox - allow unhide SNMP passwords;
- winbox - allowed to specify static-dns as list;
- winbox - do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
- winbox - do not create time field when copying CAPsMAN access list entry;
- winbox - do not show "dpd-max-failures" on IKEv2;
- winbox - do not show empty LTE fields in Info menu;
- winbox - do not start Traffic Generator automatically when opening "Quick Start";
- winbox - do not try to disable dynamic items from firewall tables;
- winbox - fixed "Montly" typo to "Monthly" in Graphing menu;
- winbox - fixed CAPsMAN channels frequency (allow to specify a list of them);
- winbox - fixed IPSec "mode-config" DNS settings;
- winbox - fixed issue when working IPSec policies were shown as invalid;
- winbox - fixed misleading error when trying to export certificate;
- winbox - fixed typo in BGP advertisements menu Aggragator->Aggregator;
- winbox - hide "wps-mode" & "security-profile" in wireless nv2 mode;
- winbox - hide health menu on RB450;
- winbox - improved "/tool torch";
- winbox - increased maximal number of Winbox sessions 20->100;
- winbox - properly name CAP Interface on new interface creation;
- winbox - properly show "dhcp-server" warnings;
- winbox - properly show IPSec "installed-sa" "enc-algorithm" when it is aes-gcm;
- winbox - properly show wireless registration table stat counters;
- winbox - removed "sfp-rate-select" setting from ethernet interface;
- winbox - removed unnecessary "/system health" menu on "hAP ac lite";
- winbox - set default "dhcp-client" "default-route-distance" value to 1;
- winbox - show "A" flag for IPSec policies;
- winbox - show "H" flag for IPSec installed SAs;
- winbox - show PoE-OUT current, voltage and power only on devices which can report these values;
- wireless - added Egypt 5.8 country settings;
- wireless - added PEAP authentication support for wireless station mode;
- wireless - apply broadcast bit to DHCP requests when using "station-pseudobridge" mode;
- wireless - do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used;
- wireless - fixed RBSXT5HacD2nr2 small channel support;
- wireless - fixed crash while running "spectral-scan";
- wireless - fixed dynamic wireless interface removal from bridge ports when changing wireless mode;
- wireless - fixed false positive DFS radar detection caused by iPhone 6s devices;
- wireless - fixed issue when wireless interfaces might not show up in CAP mode;
- wireless - fixed occasional crash on interface disabling;
- wireless - fixed rare crash on nv2 configurations;
- wireless - fixed rare wireless ac interface lockup;
- x86 - added support for NVMe SSD disk drives.
Полезные материалы по MikroTik
Секреты настройки MikroTik
Более 18.000 подписчиков самого большого telegram-канала «MikroTik-сэнсэй» первыми узнают секреты настройки MikroTik от автора этой статьи.