MikroTik RouterOS 6.38.x (Long-term)
Подробное описание изменений в MikroTik RouterOS 6.38.x (Long-term). Официальный список исправленных ошибок, добавленного функционала и прочих доработок. Дата выхода первого набора изменений – 20 июнь 2017, дата выхода последнего набора изменений – 20 июнь 2017.
Полезные материалы по MikroTik
Углубленный курс "Администрирование сетевых устройств MikroTik" Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA.
На Telegram-канале Mikrotik сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь
MikroTik RouterOS 6.38.7
Дата выхода: 20 июнь 2017
Важные изменения:
- bridge - fixed BPDU rx/tx when “protocol-mode=none”;
- bridge - reverted bridge BPDU processing back to pre-v6.38 behaviour (v6.40 will have another separate VLAN-aware bridge implementation).
Изменения:
- 6to4 - fixed wrong IPv6 "link-local" address generation;
- arp - fixed "make-static";
- bonding - do not add bonding interface if "could not set MTU" error is received;
- console - fixed "/ip neighbor discovery" export;
- console - fixed unexpected console crash when using variables as functions;
- console - instead of true/false report yes/no as LCD enabled state;
- defconf - discard default configuration startup query with configuration change from Webfig;
- defconf - discard default configuration startup query with RouterOS upgrade;
- defconf - fixed default configuration generation when wireless package is disabled;
- defconf - fixed Groove 52 ac band settings;
- dns - made loading thousands of static entries faster;
- ethernet - fixed "loop-protect" on "master-port";
- ethernet - fixed rare switch chip hang (could cause port flapping);
- fetch - fixed download issue over HTTPS;
- firewall - do not allow to set "rate" value to 0 for "limit" parameter;
- firewall - fixed "address-list" entry "creation-time" adjustment to timezone;
- firewall - fixed "address-list" entry changing from IP to DNS and vice versa;
- firewall - fixed cosmetic "invalid" flag when item was disabled;
- ike1 - fixed crash on xauth message;
- ike2 - allow multiple child SA traffic selectors on re-key;
- ike2 - fixed last EAP authentication payload type;
- ike2 - fixed policy release during SA negotiation;
- ike2 - fixed RSA authentication without EAP;
- ike2 - fixed situation when traffic selector prefix was parsed incorrectly;
- ipsec - do not deduct policy src/dst address for tunnel policies;
- ipsec - fixed generated policy priority;
- ipsec - fixed peer "my-id" address reset;
- ipv6 - fixed address becoming invalid when interface was removed from bridge/mesh;
- led - fixed turning off LED when interface is lost;
- log - added missing "license limit exceeded" log entry;
- log - work on false CPU/RAM overclocked alarms;
- netinstall - fixed typos in Netinstall status messages;
- ntp - restart NTP client when it is stuck in error state;
- ppp - fixed IPv6 address receiving on PPP interface;
- pppoe - added warning on PPPoE client/server, if it is configured on slave interface;
- pppoe-server - fixed "one-session-per-host" issue where 2 simultaneous sessions were possible from the same host;
- queue - fixed queuing when at least one child queue has "default-small" and other/s is/are different (introduced in 6.35);
- quickset - fixed LTE "signal-strength" graphs;
- smb - fixed share path on devices with "/flash" directory;
- sniffer - fixed VLAN tags when sniffing all interfaces;
- snmp - added fan-speed OIDs in "/system health print oid";
- snmp - fixed limited walk;
- switch - fixed disabling of MAC learning on CRS1xx/CRS2xx;
- tile - fixed EoIP keepalive when tunnel is made over VLAN interface;
- traffic-flow - fixed IPFIX IPv6 data reporting;
- upnp - fixed firewall NAT rule update when external IP address changes;
- userman - allow "name-for-user" to be empty and not unique;
- userman - fixed rare GUI crash when User Manager files are not accessible;
- webfig - allow to enter frequency ranges in wireless “scan-list”;
- webfig - allow to select "default-encryption" profile on PPP tunnels;
- webfig - correctly specify routing filter prefix;
- webfig - do not allow to reorder items if table is sorted by some column;
- webfig - fixed "last-link-up" & "last-link-down" time information;
- webfig - fixed Bridge Filter properties display when there are more than one Filter available;
- webfig - show all available options under "Advanced Mode" for wireless interfaces;
- winbox - added "Flush" button under “unicast-fdb” menu;
- winbox - added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" Sniffer parameters;
- winbox - added “protected-routerboard” parameters under RouterBOARD settings menu;
- winbox - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- winbox - do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
- winbox - do not allow to open multiple same sub-menus at the same time;
- winbox - do not show "dpd-max-failures" on IKEv2;
- winbox - do not start Traffic Generator automatically when opening "Quick Start";
- winbox - fixed "Montly" typo to "Monthly" in Graphing menu;
- winbox - fixed firewall port selection with Winbox v2;
- winbox - fixed IPSec "mode-config" DNS settings;
- winbox - fixed issue when working IPSec policies were shown as invalid;
- winbox - fixed switch ACL Policer statistics;
- winbox - fixed typo in BGP advertisements menu Aggragator->Aggregator;
- winbox - hide "wps-mode" & "security-profile" in wireless nv2 mode;
- winbox - properly show "dhcp-server" warnings;
- winbox - removed spare values from "loop-protect" setting for EoIPv6 tunnels;
- winbox - removed unnecessary "/system health" menu on "hAP ac lite" and “RB450”;
- winbox - show "A" flag for IPSec policies;
- wireless - reduced load on CPU for high speed wireless links.
Полезные материалы по MikroTik
Углубленный курс "Администрирование сетевых устройств MikroTik" Онлайн-курс по MikroTik с дипломом государственного образца РФ. Много лабораторных работ с проверкой официальным тренером MikroTik. С нуля и до уровня MTCNA.
На Telegram-канале Mikrotik сэнсей можно получить доступ к закрытой информации от официального тренера MikroTik. Подписывайтесь