Изменения в RouterOS:Release 6.42.2

Материал из MikroTik WiKi rus
Перейти к: навигация, поиск

Изменения в in 6.42.2 (2018-May-17 09:20):

  • ) bridge - do not allow to add same interface list to bridge more than once;
  • ) bridge - fixed LLDP packet receiving;
  • ) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
  • ) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1);
  • ) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
  • defconf - fixed wAP LTE kit default configuration;
  • dhcpv4 - prevent sending out ICMP port unreachable packets;
  • dhcpv4-client - fixed DHCP client stuck in renewing state;
  • dhcpv6-relay - fixed missing configuration after reboot;
  • filesystem - fixed NAND memory going into read-only mode;
  • hotspot - fixed user authentication when queue from old session is not removed yet;
  • interface - fixed "built-in=no" parameter for manually created interface lists;
  • interface - fixed "dynamic" built-in interface list behaviour;
  • interface - fixed interface list which include disabled member;
  • interface - fixed interface list which include/exclude another list;
  • interface - fixed interface configuration responsiveness;
  • ipsec - fixed policies becoming invalid if added after a disabled policy;
  • ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
  • led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
  • lte - improved LTE communication process on MMIPS platform devices;
  • quickset - fixed dual radio mode detection process;
  • routerboard - properly represent board name for hAP ac^2;
  • tile - fixed Ethernet interfaces becoming unresponsive;
  • winbox - allow to specify "any" as wireless "access-list" interface;
  • winbox - fixed "/ip dhcp-server network set dns-none" parameter;
  • wireless - enable all chains by default on devices without external antennas after configuration reset;
  • wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
  • wireless - fixed usage of allowed signal strength values received from RADIUS;
  • wireless - improved wireless throughput on hAP ac^2 and cAP ac;
  • x86 - fixed reboot caused by MAC Winbox connection;